box
New Member
TM MP5 SD5, KWC 92F Beretta
Posts: 71
|
Post by box on May 11, 2003 14:12:53 GMT -5
I am a gun modder. I like modifying my stuff to look tactical, cool, or for actual power. So I had recently bought an HFC Bullpup 230 (It looks like a Tec-9 on crack) and I took it apart and figured out how it works. I went down to my local Ace Hardware and picked up some Brass lamp tube about 3 feet long. It was solid and was 1/4" so I figured it would work. The problem is that with the barrel plugged into the seal, it streaches the sealto about 5mm so the BB's dont come out. Im just curious on what I should do because the original barrel is about 4" long and the new one is closer to 10". Thanks in advance.
|
|
|
Post by Bigmack on May 11, 2003 14:46:54 GMT -5
if you're doing this (which i see as a waste of time trying to make a shit gun shoot well) you'd need a 6.04 inside diameter barrel.
|
|
box
New Member
TM MP5 SD5, KWC 92F Beretta
Posts: 71
|
Post by box on May 11, 2003 18:21:04 GMT -5
Can i buy one for a reasonable price? What website would sell it or what material would I have it made out of? Copper? Aluminum?
|
|
|
Post by Knief on May 11, 2003 18:26:56 GMT -5
|
|