|
Post by Caboose on Sept 20, 2014 12:11:50 GMT -5
I picked up two bottles of the .28s and .32s and have had mixed results. Accuracy/precision wise, they are significantly better than the Bioval .30s I've been using. However, they only want to feed in high caps. I have Elite Force mids, and both weights will only feed in my 416; even then, it seems they only want to feed up to about 18rps. I saw a thread on Airsoft Society from a few months back claiming that they have to be washed before they feed well. Just wanted to know if anyone here has had similar results.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Sept 20, 2014 13:46:18 GMT -5
Could it possibly be your 416 that is not allowing the bbs to feed? Because I know that on my Masada certain bbs have trouble feeding at higher rps, or don't feed at all. Yet on my Block II, every possible weight in any mag I use always works an almost any RPS.
|
|
|
Post by Caboose on Sept 20, 2014 14:08:53 GMT -5
Could it possibly be your 416 that is not allowing the bbs to feed? Because I know that on my Masada certain bbs have trouble feeding at higher rps, or don't feed at all. Yet on my Block II, every possible weight in any mag I use always works an almost any RPS. Actually, they feed best in the 416. I'll be a little more specific: - The 416 feeds 90% of the time on semi-auto with Core bbs and Elite Force 140rnd midcaps (filled to 100-120rnds). On full auto, the Core won't feed past about 18rps. Below that, they still misfeed about 25% of the time. - My three ARs refuse to feed with the Core BBs using the midcaps; semi or full auto doesn't matter. I'm lucky to get 10% that actually fire. - All four of the rifles feed perfectly using Core BBs in G&G 450rnd high caps. Each have sector chips, are well tuned internally, and all but the 416 have been R-hopped. - Bioval .30s feed perfectly in both the high and mid capacity magazines, but the Core outperform them noticeably. At this point, I know it is the bbs not feeding well, just looking to see if others have had problems specifically with Core, and if washing them got rid of those problems.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Sept 20, 2014 18:29:15 GMT -5
Well, I have had some issues with low quality bbs that were not polished well. Soaking them in water mixed with some lubricant helped them feed a lot.
|
|