|
Post by dizzyshot (Bad Company) on May 24, 2014 14:24:40 GMT -5
I like the look of a gun that looks integrally suppressed, but I find few guns that have that look. So the second option is to make a gun look integrally suppressed. The gun I would like to do this with is a G&G Firehawk. The second post in this thread from another forum suggested how to make your gun integrally suppressed. Would this person's suggestion work is my main question. Thanks for any info and suggestions. The suggestion is the second post of the thread. metroatlantaairsoft.darkbb.com/t3766-gg-gr16-blow-back-integral-suppressor-help
|
|
|
Post by Ogre on May 24, 2014 14:33:02 GMT -5
I'm gonna go ahead and say no, bad grammar is always a red flag.
|
|
|
Post by dizzyshot (Bad Company) on May 24, 2014 14:37:23 GMT -5
I'm gonna go ahead and say no, bad grammar is always a red flag. On my part or the person who suggested it on the other thread? Also if you Google "internally suppressed" it will change it to "integrally suppressed". If the grammar is on my part.
|
|
|
Post by Ogre on May 24, 2014 15:08:22 GMT -5
On the post you linked.
|
|
|
Post by dizzyshot (Bad Company) on May 24, 2014 15:09:22 GMT -5
Do you think it could possibly work in some way?
|
|
|
Post by Ogre on May 24, 2014 15:13:57 GMT -5
Possibly, I would look more into it
|
|
|
Post by Bishop (Task-Force Nightmare) on May 24, 2014 15:20:09 GMT -5
Like this gun? Ha ha Sent from my SCH-I535 using proboards
|
|
|
Post by dizzyshot (Bad Company) on May 24, 2014 15:21:49 GMT -5
Similar except a little longer suppressor, but just as "beefy".
|
|
|
Post by snafu on May 24, 2014 16:50:36 GMT -5
|
|
|
Post by Pagan on May 24, 2014 16:55:24 GMT -5
You just need to find the right length outer barrel for what ever length rail you're using. My 12" Noveske upper.
|
|
|
Post by dizzyshot (Bad Company) on May 24, 2014 17:39:14 GMT -5
snafu: Not that long like an inch or two out from the RIS. Pagan: That's a look I'm going for minus the rail ladders at the moment. Everyone else: This is what I'm thinking about doing at the moment. The idea is I take off the muzzle break (big orange "beak"), add a suppressor onto the outer barrel were the muzzle break was previously, and put a 7 inch RIS on the gun to make it have that integrally suppressed look. Here are the links to the pieces I believe I'll need. www.evike.com/products/44979www.evike.com/products/24394%7B2%7D128www.evike.com/products/40477
|
|
|
Post by Pagan on May 24, 2014 18:03:19 GMT -5
If your using a 7" ris, you'll need a 4" outer barrel.
I'd wait until you have the ris before getting the fake suppressor. You need to make sure it will fit under the rail.
|
|
|
Post by dizzyshot (Bad Company) on May 24, 2014 18:11:03 GMT -5
I'll do that and thanks for the advice all of you.
|
|
bera
New Member
Im Turkish.
Posts: 37
|
Post by bera on Jun 28, 2014 11:00:19 GMT -5
How did this turn out?
Sent from my iPhone using Tapatalk
|
|