|
Post by Gunslinger on Jan 20, 2013 22:05:19 GMT -5
|
|
Hound
New Member
I always break my guns...
Posts: 654
|
Post by Hound on Jan 20, 2013 22:21:23 GMT -5
Maybe the PEQ could go. It just seems like too much. But its looking pretty good.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Jan 20, 2013 22:30:04 GMT -5
Put the peq on top maybe, and definitely some different sights or at least paint the mbus black. Also, I think there is some sort of flashlight that mounts in right above the barrel. I'm not sure if it works with the replica though.
|
|
Spaz
New Member
Toy Soldiers
Posts: 77
|
Post by Spaz on Jan 20, 2013 22:35:04 GMT -5
Put the peq on top maybe, and definitely some different sights or at least paint the mbus black. Also, I think there is some sort of flashlight that mounts in right above the barrel. I'm not sure if it works with the replica though. There is a flashlight that fits the top barrel area but it is 70 bucks and only around 120ish lumens. I do like the aim point, but not the peq or irons.
|
|
|
Post by Gunslinger on Jan 20, 2013 22:56:20 GMT -5
|
|
|
Post by Kilo031 on Jan 20, 2013 23:03:37 GMT -5
Did you strip and polish the outer barrel?
|
|
|
Post by Gunslinger on Jan 20, 2013 23:25:55 GMT -5
Not stripped just took a little dremal wire wheel to it. I have a video on how I did it here. youtu.be/avZNwkhdco4
|
|
Spaz
New Member
Toy Soldiers
Posts: 77
|
Post by Spaz on Jan 20, 2013 23:30:31 GMT -5
I wonder if you could re-thread it for 14mm ccw. The 16cw seems annoying.
|
|
|
Post by Gunslinger on Jan 21, 2013 0:24:47 GMT -5
|
|
Hound
New Member
I always break my guns...
Posts: 654
|
Post by Hound on Jan 26, 2013 16:23:06 GMT -5
I'd put a vert grip on bottom and flashlight on the outside. The stock irons looks pretty nice.
|
|
|
Post by Gunslinger on Jan 29, 2013 22:04:28 GMT -5
I almost like it with no grip just because the whole front of it is designed as a grip and it give you a place for a light that takes it out of the way. The rail might not ever get used. Also who by Asia has surpressor designed for the vector so I should be all set.
|
|