Post by drewroud on Jan 2, 2013 14:13:48 GMT -5
So I have tried a lot of guns out, and to me all aeg's pretty much feel the same. I am building this cqbr as a primary, it is pretty much going to be my gun that I play with everywhere, cqb, outdoor, you name it. I love performance and to tinker with things, so it not going to be an average gun.
The base is a king arms m4 that I got a year ago. The gearbox shell cracked, and I decided to replace it, and then I got the notion of building it even more.
Here is what the stock gun looks like:
www.evike.com/product_info.php?products_id=35201
Here is what I already have:
Externals
King arms lower / upper
ACM Magpul stock
Aim top Shorty 10.5 barrel
CYMA KAC Ris
JG dmr grip (uber comfortable)
Rear flip up
Clone Holo 551
Pro & T peq box - flash light and laser
Fake "Bitch" grip
As for internals, it has various brands. It is currently shooting 325 fps at 26 rps with a buffer tube lipo.
Goals:
200-300 feet range
Consistent 350 fps
35 rps with 11.1
Short trigger pull
Hop up tracer unit
Currently I have a modify 6.03, and the range will be achieved with an r hop patch. As for the 35 rps, I will be installing 13:1 gears and other various parts. I plan on fitting an 11.1 and mosfet in the buffer. I also have a speed adjustable trigger that makes the trigger pull very short.
Externals to get:
Vortex 14mm flash hider
Cyma qd kac suppressor
Tango down grip
Replacement light for the peq box
(I will replace the light module in the peq itself)
Eventually, I might build a dual sector gear for 55 rps in this gun.
Pics:
Now the cool thing about my guns is that I install hop up trace units - hutu's. There are two led's in the hop up unit powered by a small 7.4 battery in the ris. I also installed a switch so I can turn it off and on. Great for night games.
This thread will be updated as I get the parts to show the progression of the gun.
The base is a king arms m4 that I got a year ago. The gearbox shell cracked, and I decided to replace it, and then I got the notion of building it even more.
Here is what the stock gun looks like:
www.evike.com/product_info.php?products_id=35201
Here is what I already have:
Externals
King arms lower / upper
ACM Magpul stock
Aim top Shorty 10.5 barrel
CYMA KAC Ris
JG dmr grip (uber comfortable)
Rear flip up
Clone Holo 551
Pro & T peq box - flash light and laser
Fake "Bitch" grip
As for internals, it has various brands. It is currently shooting 325 fps at 26 rps with a buffer tube lipo.
Goals:
200-300 feet range
Consistent 350 fps
35 rps with 11.1
Short trigger pull
Hop up tracer unit
Currently I have a modify 6.03, and the range will be achieved with an r hop patch. As for the 35 rps, I will be installing 13:1 gears and other various parts. I plan on fitting an 11.1 and mosfet in the buffer. I also have a speed adjustable trigger that makes the trigger pull very short.
Externals to get:
Vortex 14mm flash hider
Cyma qd kac suppressor
Tango down grip
Replacement light for the peq box
(I will replace the light module in the peq itself)
Eventually, I might build a dual sector gear for 55 rps in this gun.
Pics:
Now the cool thing about my guns is that I install hop up trace units - hutu's. There are two led's in the hop up unit powered by a small 7.4 battery in the ris. I also installed a switch so I can turn it off and on. Great for night games.
This thread will be updated as I get the parts to show the progression of the gun.