YoYo-Pete
New Member
Nunquam?Imparatum
Posts: 250
|
Post by YoYo-Pete on Oct 17, 2012 14:09:49 GMT -5
What's up everyone... Would like to increase my accuracy without really breaking the bank.
I was thinking of moving to a tight bore barrel first. From my research seems a .603 is the ideal?
What else should I do off the bat without getting crazy? I.E. The easiest upgrades which will affect accuracy most?
Note that it's not terribly inaccurate, I just feel it could be better (want it better).
|
|
|
Post by AtsJason on Oct 17, 2012 14:18:53 GMT -5
Barrel and bucking.
|
|
|
Post by Shanker on Oct 17, 2012 14:19:04 GMT -5
Look into the R-Hop. They are very cheap and I know it was my best accuracy and range upgrade.
|
|
|
Post by Gimpalong on Oct 17, 2012 14:19:22 GMT -5
A tightbore may help. You should also try out a variety of bucking and nub combinations. Achieving a high degree of accuracy in airsoft is less about buying Component A and mating it with Component B than it is about buying Component A, B, C, D and E, fitting them together and testing to see which combination works best.
|
|
YoYo-Pete
New Member
Nunquam?Imparatum
Posts: 250
|
Post by YoYo-Pete on Oct 17, 2012 14:52:53 GMT -5
Good deal... So basically my best bet to accomplish this is to have a complete understanding of how bucking and nub is affecting it and do some trial and error. I conceptually know how that all works, but time to roll up the sleeves.
Thanks crew.
|
|
|
Post by snafu on Oct 17, 2012 15:59:09 GMT -5
Good deal... So basically my best bet to accomplish this is to have a complete understanding of how bucking and nub is affecting it and do some trial and error. I conceptually know how that all works, but time to roll up the sleeves. Thanks crew. You pretty much hit the nail on the head.
|
|
|
Post by Mles on Oct 17, 2012 20:50:41 GMT -5
This should be in the tech discussion and it is "6.03" not .603 depending on if you're measuring with millimeters.
|
|
|
Post by ThompsonFTW on Oct 17, 2012 21:09:25 GMT -5
A lot of what matters in accuracy has been stated, but I thought I would throw in my 2 cents. www.airsoftsociety.com/forums/f10/my-guide-fine-tuning-hop-up-33545/Great guide for accuracy. Also, something no one has said is the kinds of bbs you are using matters. If you want your gun to perform well be prepared to spend some money on bbs. You shouldn't be looking to cheap out if you want great accuracy.
|
|
YoYo-Pete
New Member
Nunquam?Imparatum
Posts: 250
|
Post by YoYo-Pete on Oct 18, 2012 9:38:48 GMT -5
Understood re: BBs. I get Airsoft Elite brand as from what I've read seem to be one of the better and most reliable. If there's a better brand, I'd like to know. And I run .25's.
And thanks for the corrections Miles.
|
|