KJW Mk 1 re-assembly problems SOLVED!

[Shadow (314)]

Ok, so I've disassembled and re-assembled my KJW Mk 1 before and I did so again to clean it.
The problem is, this time I can't for the life of me to get it back together right. It all goes back and fits nicely but when I pull the trigger, it goes a little less than half way and gets jammed up on something. I did a quick search and read that I may have had an issue re-installing the barrel or the hammer. I tried re-installing everything without the charging bolt so the hammer had nothing to catch on and still had the same problem so I think it's something near front with the arms that catch on the barrel.

Any suggestions?
Thanks.

[Shadow (314)]

Solved!!

The metal piece that the trigger arms fit into to pull the barrel back has a stupid little bevel that is needed to give clearance for the full trigger pull. It's barely there at all and almost unnoticeable at all. If anyone has this gun, that piece can flip upside down. Make sure it's right side up.