|
Post by Alex-(BM_5) on Jul 13, 2012 0:18:17 GMT -5
Okay, So I buy these G-55 mag's put gas in them and they IMMEDIATELY start spewing out the gas from the middle of the mag. A small amount of research later and I find out these mags are basically known to leak before a shot is fired through them.
My question for you guys is, does anyone know what type of O-Ring I can replace the stock ones with or does anyone know of any quick fixes?
|
|
|
Post by Knief on Jul 13, 2012 7:45:45 GMT -5
|
|
|
Post by Alex-(BM_5) on Jul 13, 2012 10:11:22 GMT -5
Anyone know what brand of duster I can use the AI adapter on? I used propane and probably blew the seals. Also are O-rings supposed to be SUPER tight on there or just flush with the metal.
|
|
|
Post by Knief on Jul 13, 2012 12:44:58 GMT -5
Any brand of duster gas. You just pop off the nozzle and put the adaptor on. But you're not using a Maruzen mp5, you're using a Well. The likelihood that it'll cycle well on duster is slim. You should be using propane or green gas. I sent you the link to verify the o-ring size, not for the information specific to the Maruzen mp5 pressure problems (which the thread explicitly states doesn't apply to the Well mp5).
As for your O-ring question, I'm not quite sure I know what you're asking. Can you take a high quality picture of the area of concern? Not with a cell phone and with good lighting.
|
|
|
Post by Alex-(BM_5) on Jul 13, 2012 13:42:32 GMT -5
No, I am in fact using a maruzen mp5k, what I am asking is should the O-ring be very tight on the area that is leaking. I'll take pic's tonight.
|
|
|
Post by Knief on Jul 13, 2012 13:51:19 GMT -5
Yeah, that's the kind of thing you should mention earlier.
|
|
|
Post by Alex-(BM_5) on Jul 13, 2012 13:51:55 GMT -5
Using a maruzen with G-55 mags.
|
|
bobbunny
New Member
No long fishing.
Posts: 779
|
Post by bobbunny on Jul 14, 2012 4:59:00 GMT -5
I really don't think you should be using propane in a Maruzen...
|
|