|
|
Post by Doctor on Jul 6, 2012 14:07:49 GMT -5
Hello everyone, I recently traded for the agm sniping rifle and was told that there were no upgrades other than something to do with air-seal, so I figured why not do more? So I have Teflon-taped the barrel where the bucking sits and also done a dental floss air-seal mod. I went to fire it to see how it was doing with Mad-bull .36's they skew to the right mostly even with hop off. Have I sealed it so well that the pressure is too high for .36 or do you think I could have done something wrong? Thank you all.
|
|
|
|
Post by Da Vinci - Да Винчи on Jul 6, 2012 14:33:27 GMT -5
Are the hop-up and inner barrel installed correctly? If it's twisted, that might be the problem.
|
|
|
|
Post by Doctor on Jul 6, 2012 14:39:12 GMT -5
I just took everything apart and took the teflon off and I think that was messing with it.
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Jul 7, 2012 9:37:44 GMT -5
This is a common issue with the VSR 10 series hop up design. You need to ensure that the "slider" piece that is connected to another piece by two screws does not bend up. An anti flex plate or shim will prevent it bending up, which results in the curving issue as uneven pressure is applied to the bucking when bent.
|
|
|
|
Post by Doctor on Jul 7, 2012 16:51:54 GMT -5
Do you have a diagram to illustrate what part you are referring to?
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Jul 7, 2012 22:24:44 GMT -5
|
|
|
|
Post by Doctor on Jul 7, 2012 23:12:51 GMT -5
Alright just watched the hop-up video, very well made and thank you I will work on that.
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Jul 8, 2012 8:12:01 GMT -5
Thank you sir!
Hit me up if you ever need that shim. A guy over on Airsoft Sniper Forum will make it for cheap.
|
|
|
|
Post by Doctor on Jul 8, 2012 10:11:52 GMT -5
Actually I visited the mentioned forum and found the Top Dead Center mod and I am going that route instead.
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Jul 8, 2012 11:34:48 GMT -5
Actually I visited the mentioned forum and found the Top Dead Center mod and I am going that route instead. Another good mod, both will do wonders with your gun. Good luck bro! |
|
|
|
Post by Doctor on Jul 8, 2012 19:57:54 GMT -5
Drilled the top hole wrong and had to redrill, thats what I get for not doing it the right way
|
|
