|
Post by racoon2014 on Jun 12, 2012 11:29:44 GMT -5
Mods, if this is in the wrong section, do move for me, thank you. My question: Is there anyway to size down Propper gear? I got a set of Multicam for christmas (it was sized up so I can grow into them) and the shirt fits just fine, but the pants are just way too baggy for me. The length is okay, but I just need the baggy-ness sized down. Any way to fix this? Thanks.
|
|
Fission
New Member
Full Metal Fanatic.
Posts: 250
|
Post by Fission on Jun 12, 2012 11:43:01 GMT -5
They should have adjustment on the waistband for that, it will be a small strap on either side. You can see it on the waistband in the picture below. It's the small black strap by the belt loop. This gives slight adjustment of fit. If that does not take enough out of the pants, you will need to wear a belt. If you are talking about the pants overall being baggy, like the legs are too wide all the way down or something and you feel like you're swimming in them regardless, you'll need them tailored. Probably need the seat of the pants taken in to account for it slightly, no other way to adjust for baggy pant legs.
|
|
|
Post by Zorak on Jun 12, 2012 11:44:34 GMT -5
Can you be more precise about the problem? It's been a long time since I had the luxury of being too small for pants, but in general, all I can think of is a belt (or even suspenders + belt) for keeping them from sliding down. If they're so baggy that they're impeding movement, you could try going to a tailor and see if they could tack them up a bit. However, I'm concerned that basic/temporary tailoring cannot be reconciled with the demands of airsoft. You'd need heavy duty stitching for the waist, crotch, or thighs to stand up to the demands of running and sliding and otherwise being all airsofty. That sort of time and energy make sense when you're improving the fit of a $200 suit, but probably not so much for a $30 set of pants.
Edit: The straps from a good dropleg might actually help keep the bagginess around the thighs under control.
|
|
|
Post by racoon2014 on Jun 12, 2012 12:20:03 GMT -5
Well the total of the suit was around $140-$160 (If I remember right) and i'm talking about the legs being too wide like Fission said. But I guess I'll last until I grow into them more because I don't really know a tailor, or I'll get a drop leg like Zorak said. I also already wear a belt with them, so the waist is no problem.
|
|
Fission
New Member
Full Metal Fanatic.
Posts: 250
|
Post by Fission on Jun 12, 2012 12:22:45 GMT -5
I was going to mention a drop leg to take it out of the thighs, i did that for a lot of years. I wouldn't recommend sacrificing gear functionality or comfort to keep your pants tight to your leg though. If a drop leg platform is what works for you you're golden, if not don't keep it just to hold your pants.
|
|
|
Post by Zorak on Jun 12, 2012 13:39:27 GMT -5
Heck, if you're not trying to do a rock solid impression, just get some tape in a tactical color and wrap it around your thigh - though not tight! For optional faux cool points, write your blood type on the tape.
|
|
|
Post by racoon2014 on Jun 14, 2012 0:13:58 GMT -5
Alright. I'm just trying to do a special unit operator loadout/impression. Maybe tape in black or ACU. So far I think that is the cheapest and easiest of the solutions. and its not like the colors have to match since it's my own style loadout/impression. Thanks for the help guys.
|
|
|
Post by Thor on Jun 14, 2012 3:56:29 GMT -5
Knee pads would also provide a point where the pants would get cinched up, and not look out of place or restrict movement in any meaningful way.
|
|
|
Post by Gimpalong on Jun 14, 2012 9:23:45 GMT -5
I've had similar issues with gear since (despite being "full grown") I'm pretty short at 5'6". Obviously, since you've already purchased your uniform, this doesn't apply to you, but it's always best to buy the correct size for your body type. This can be tough if you're buying ACM stuff since it is usually sized to Asian frames. Generally, however, BDUs made by Propper, Tru-Spec, etc should be sized for Westerners in the traditional Small/Medium/Large - Short/Regular/Long categories. Some tips for getting rid of bagginess: 1. Blouse your pants into your boots. 2. Add kneepads. 3. Add a drop-leg. 4. Use a good belt that can tighten down and stay tight. 5. Add tie-downs a la "Band of Brothers" As was mentioned, you could have your pants tailored, but that is really dependent on how much you actually care, how much money you want to spend and how much money you initially invested. Honestly, BDUs are supposed to be baggy and I reckon that very few airsofters spend their time eyeing people for bagginess.
|
|
|
Post by GrinchBiscuit on Jun 16, 2012 7:33:02 GMT -5
If you want something in a more Trim cut, please see your nearest brick and mortar Gap.
|
|