|
Post by justified on Sept 28, 2011 14:31:22 GMT -5
So I have this c02 pistol have had it for a while now www.airsplat.com/Items/GP-SA-21547.htm. When I put the c02 canister inside of the magazine and screw it in when the gas seal pops on the back of the magazine all the c02 comes out of the silver piece on the back. What is wrong with this/ any quick fixes?
|
|
|
Post by Mles on Sept 28, 2011 15:03:50 GMT -5
Wrap some teflon tape around the threads. Should fix it right up.
|
|
|
Post by justified on Sept 28, 2011 15:28:01 GMT -5
What exactly is a thread?
|
|
|
Post by airsplat on Sept 30, 2011 18:25:12 GMT -5
I believe he means if you use co2 with screw threads at the top, teflon tape will prevent leaks from occuring, can you please post a pic of the item? the link you provided was dead. Is gas coming out of where you load the co2? or is it coming out the front of the barrel? Another quick fix is to put a drop of heavy weight silicone oil on the puncture needle, it will allow the lube to go throughout the entire gun. hope this helps
|
|