|
Post by Zander on Aug 28, 2011 19:16:40 GMT -5
Picked up a mag and not sure what brand it is. Maybe some of you TM Glock guys can help me. Looks to be TM style but lacking the Glock trades on the back I'm assuming it isn't. Maybe KJW?
|
|
|
Post by Thor on Aug 28, 2011 19:19:05 GMT -5
Where's the base plate?
|
|
|
Post by Zander on Aug 28, 2011 19:38:04 GMT -5
Didn't come with one.
|
|
Zerox
New Member
SK-14
Posts: 316
|
Post by Zerox on Aug 28, 2011 20:17:44 GMT -5
That's definitely not a TM mag, I also have my suspicions of it being a KJW.
|
|
|
Post by sparky153 on Aug 29, 2011 14:41:12 GMT -5
It could be a HFC glock mag. HFC has the sliding base plate so you can fill it. The base plate probably broke off and that's why it's not there. Here is a video where it is shown. www.youtube.com/watch?v=8D_h48uYD2Q watch from 3:20.
|
|
|
Post by Zander on Aug 29, 2011 18:31:25 GMT -5
Yup that looks to be it. Thanks.
|
|
|
Post by BoredKender on Aug 29, 2011 19:01:00 GMT -5
HFC/KJW use the same mag design and will work in TM's. They will NOT however, work in KSC/KWA glocks as the seal on top is shaped differently. To make sure it is not a KWA we would need a picture of the top seal. Skinny rectangle going length-wise is TM/KJW/HFC design, wider rectangle going side-to-side is KSC/KWA design. I hope this helps a bit.
|
|
|
Post by sparky153 on Aug 29, 2011 20:21:55 GMT -5
Yup that looks to be it. Thanks. Welcome.
|
|
|
Post by Zander on Sept 6, 2011 11:07:14 GMT -5
Is this KSC on the left and TM on the right? To me they are, the KSC just had a TM style plate.
|
|