thedeisel
New Member
Operator ID: S51
Posts: 619
|
Post by thedeisel on Jul 19, 2011 0:30:56 GMT -5
For about 6 months I have been working on this project. I have finally gotten near the end due to getting money from my new job. I still want to add a Magpul AFG, some more rails, and a 6.03 TBB. I cannot add the MOE grip unless I get a tech to do it because the KWA's motor is picky with grips. But here it is so far! ;D - KWA KM4 CQB - MOE handguard - MOE stock with butt pad - AGM sound amplifier - Bravo ACOG - G&G handguard rail - UTG Deluxe light with mount - Firefox 7.4V LiPo Note that the rail and light is currently on the right side of the handguard. I put it on the bottom so you will be able to see it in the picture. It is currently shooting at 350FPS with the LiPo and .20 BB's, so it is able to operate in CQB. The ROF is 15 BPS with the LiPo and .20 BB's. Thank you for looking at my gun! ;D
|
|
Lucky
New Member
B72 Fat Glowsticks
Posts: 348
|
Post by Lucky on Jul 19, 2011 2:09:04 GMT -5
Throw that light on the trash and get a buis. Other than that I really like the simplicity of it...and I'm an acog guy.
|
|
TimeDeatH
New Member
Grass grows, birds fly, sun shines, and brother... I hurt people.
Posts: 516
|
Post by TimeDeatH on Jul 19, 2011 7:36:22 GMT -5
Definitely needs a BUIS. The setup here is very similar to the one I have on my rifle.
|
|
|
Post by Carnage on Jul 19, 2011 8:01:12 GMT -5
Lucky and TimeDeatH are right. Get a BUIS, preferably a Magpul MBUS so it matches.
As for a grip for the handguard, get a Magpul MVG grip. It attaches directly to the handguard so there's no need to buy another rail. Also, the AFG compared to a VFG kinda sucks IMO. The AFG is used for a race gun (competitive shooting stuff). Other than that, it really isn't very effective when using it all day. spectre, from our team, decided to not use his anymore because it's just uncomfortable. So... get a Magpul MVG grip.
Or, like Lucky said, ditch the light. A black SureFire M900 replica would look cool, give you a grip and a good flashlight in one. But it MAY look out of place with the Magpul parts.
Just my suggestions. Hope it helps.
|
|
|
Post by Pagan on Jul 19, 2011 8:47:11 GMT -5
As for a grip for the handguard, get a Magpul MVG grip. It attaches directly to the handguard so there's no need to buy another rail. Also, the AFG compared to a VFG kinda sucks IMO. The AFG is used for a race gun (competitive shooting stuff). Other than that, it really isn't very effective when using it all day. spectre, from our team, decided to not use his anymore because it's just uncomfortable. So... get a Magpul MVG grip. The only problem with the MVG are the screws it uses to mount. With some batteries, the screws can get in the way and or puncture the battery when you close the hand guard. I use the RVG because the mounting screws for the magpul rail are smaller than the ones used with the MVG (which has two mounting pieces that go in to the MOE hand guard slots). If you have a thin profile outer barrel, you should be ok, but it is a tight squeeze. I found with a standard outer barrel, I was having a hard time getting the battery positioned with out causing damage or not being able to close the hand guard properly.
|
|
|
Post by Carnage on Jul 19, 2011 13:18:06 GMT -5
Good point Pagan. I don't know if this will help any but he has a 7.4v buffertube sized LiPo if need be.
But I guess in my opinion, a replica SureFire M900 would be cool...
|
|
thedeisel
New Member
Operator ID: S51
Posts: 619
|
Post by thedeisel on Jul 19, 2011 15:28:08 GMT -5
If i really bought another light, I wouldn't cheap out. I would buy a Legit Streamlight military tactical light for $150.
|
|
|
Post by Carnage on Jul 19, 2011 16:56:32 GMT -5
I'd save for a SureFire model if you want to go legit.
|
|
thedeisel
New Member
Operator ID: S51
Posts: 619
|
Post by thedeisel on Jul 19, 2011 16:57:18 GMT -5
Streamlight is legit.
|
|
|
Post by Carnage on Jul 19, 2011 17:12:47 GMT -5
Streamlight is legit. Right... But you gotta admit, a SureFire M900 looks pretty good right?
|
|
thedeisel
New Member
Operator ID: S51
Posts: 619
|
Post by thedeisel on Jul 19, 2011 17:26:56 GMT -5
Maybe on yours, but it doesn't look right with a Magpul gun. You should buy it, it's only $650! haha
|
|
|
Post by Carnage on Jul 19, 2011 17:30:34 GMT -5
I'd rather get an EOTech for that price.
Also, you should get a KAC QD suppressor. I've seen it with a Magpul MOE M4 and it looks good.
|
|
thedeisel
New Member
Operator ID: S51
Posts: 619
|
Post by thedeisel on Jul 19, 2011 17:46:24 GMT -5
If I would get a suppressor, I'd get a Gem-tech by Madbull with a Madbull 363mm 6.03mm python version II TBB. Actually I might get a python 363mm 6.01mm TBB for $15 from a friend.
|
|
|
Post by Carnage on Jul 19, 2011 17:56:27 GMT -5
Get a Prometheus 6.03mm TBB. They're more worth the money. But to each their own I guess.
But whatever you decide, hopefully you'll like it the most.
|
|
|
Post by boxxybabee on Jul 24, 2011 4:59:55 GMT -5
Now what caliber is that their rifle? My son is looking to buy that one from you.
|
|