Post by Gorem on Jul 3, 2011 14:59:31 GMT -5
Friday night, I purchased a double eagle ump to play with. As the night went on, I realized that there were multiple problems with the rifle and that they could easily be fixed.
I found an appropriate size m4 barrel to replace the inner barrel.
Then, I used my madbull silencer and modified it to work on the end of the outer barrel.
Old barrel next to the new one.
I then went to work on the hop up, I found out that the reason I was getting no hop up on the bb was that there was no hop up nub.
I then realized the clip that holds in the barrel had broken, so I needed to tape the hop up.
Lastly for the night, I stripped the rails off of the outside of the body, and I prepared it for paint.. Here is a finished picture before I send it to the paint.
Here is the end of the silencer, where I stabilized the barrel against the silencer
Here is the finished project.
Before painting
Final picture.
Here is a sexy angle.
I found an appropriate size m4 barrel to replace the inner barrel.
Then, I used my madbull silencer and modified it to work on the end of the outer barrel.
Old barrel next to the new one.
I then went to work on the hop up, I found out that the reason I was getting no hop up on the bb was that there was no hop up nub.
I then realized the clip that holds in the barrel had broken, so I needed to tape the hop up.Lastly for the night, I stripped the rails off of the outside of the body, and I prepared it for paint.. Here is a finished picture before I send it to the paint.
Here is the end of the silencer, where I stabilized the barrel against the silencer
Here is the finished project.
Before painting
Final picture.
Here is a sexy angle.
