|
Post by dufflebag on May 30, 2011 17:02:12 GMT -5
Well... I dont know where to start. I need to know what style plate carrier they wear, and how the vests are set up for a SAW gunner. Pictures of a Marine Recon SAW gunner would help.
Thanks, Duff.
|
|
|
Post by Knife on May 31, 2011 14:18:02 GMT -5
It's a bit hard to say as there just aren't that many photos around that I've found. When Relish was making one, we could hardly find any. He may have found more since then, so he may pop in and say something to that regard as well. That said, your best bet is probably a Land CIRAS or RRV. You could try an MBSS, but I don't think that's the best vest for running a SAW. Some of the newer photos show some people rocking the SPC, but those are newer Recon photos, not Force Recon. As far as pouches go/set ups. At the minimum you probably want 2x M60 or SAW pouches, I can't say for sure but I believe that you can fit a SAW box mag in either. If I get a chance to handle a SAW anytime soon I'll try and test it in each type of pouch. I prefer M60 pouches to SAW pouches as I prefer the buckle or velcro closure to the dual flap that SAW pouches have. Outside of that, you'd want an MBITR radio pouch and a hydration pouch. If you plan on running a side arm, get some FB pouches for the mags. If you're going for Force Recon, you'll want 1911 pouches, or if you're just doing Recon, M9 pouches. As far as other pouches/items, you can look in my guide to get a general idea.
|
|