|
|
Post by Legionnaire on Oct 3, 2010 14:18:55 GMT -5
|
|
Vigil
New Member
Whoa! Buy one pair of EMT shears and now amazon.com thinks I'm in to kinky bondage stuff.
Posts: 130
|
Post by Vigil on Oct 3, 2010 16:40:47 GMT -5
Nice gear man! Never really been a big fan of PEQs but that thing looks great. My only question is, what kind of radio are you using?
|
|
|
|
Post by Legionnaire on Oct 4, 2010 9:49:17 GMT -5
I'm using a Motorola Talkabout. You can see it in third and fourth pic in next to the PTT. The MBITR on my MAP is just a dummy, which can be found for pretty cheap.
I was originally going to put my Talkabout inside it but it was to wide and would have forced me to mod it. Also, with the rec games I go to, we tend to switch channels quite a bit so it would be impractical.
|
|
Vigil
New Member
Whoa! Buy one pair of EMT shears and now amazon.com thinks I'm in to kinky bondage stuff.
Posts: 130
|
Post by Vigil on Oct 4, 2010 11:13:30 GMT -5
Ok cool. Just wanted to know because it looks like its pretty compatable with a lot of the headsets and other mics.
Do you need a license with that? Because im not sure about all of the radios but I think they use both FRS and GMRS.
|
|
|
|
Post by Legionnaire on Oct 4, 2010 19:28:56 GMT -5
Nope. No license necessary. Its a fake and is non functioning.
If your referring to the Motorola then no. You can pick them up at your local Radio Shack.
|
|
Vigil
New Member
Whoa! Buy one pair of EMT shears and now amazon.com thinks I'm in to kinky bondage stuff.
Posts: 130
|
Post by Vigil on Oct 4, 2010 20:18:05 GMT -5
Yeah i was refering to the talkabout. the one I saw had like a 20 mile range and needed a license.
|
|
|
|
Post by Great Troub of Troubistan on Oct 6, 2010 16:50:20 GMT -5
I'd use something other than electrical tape to hold the pad onto the grip, but thats just me. Other than that it looks good.
|
|
|
|
Post by Legionnaire on Oct 6, 2010 19:12:33 GMT -5
I'd use something other than electrical tape to hold the pad onto the grip, but thats just me. Other than that it looks good. Agreed. I plan on getting a vertical grip with pressure pad slot soon. |
|
|
|
Post by lanman on Oct 6, 2010 23:09:14 GMT -5
Nice gear! Are those the replica Sordins off Redwolf? If so do they work alright? I've been thinking of getting a pair.
|
|
|
|
Post by Legionnaire on Oct 9, 2010 14:19:37 GMT -5
Didn't get them off of Redwolf but I assume they are the same. They work great. I wrote up a review and put it on the oda561 forum if you want to check it out.
|
|
|
|
Post by Fugazi on Oct 12, 2010 7:57:03 GMT -5
Looks good, why don't you run a lipo in the buffer tube do you don't have that wire exposed? Get her dirty, hide the wire, and A+. Everything is perfectly placed, except random... earplugs?
What's with the earplugs?
|
|
|
|
Post by Judge on Oct 12, 2010 9:20:21 GMT -5
You need a new Aimpoint mount. Cantilevers are lamesauce.
|
|
|
|
Post by Legionnaire on Oct 12, 2010 20:53:58 GMT -5
What's with the earplugs? Earplugs are for show. I've seen pictures of Seals with them placed there for target shooting I'm assuming. So I popped em in there in an attempt to look ub33r l337 s34lz0rz. And don't worry, my next purchase is the stock tube lipo. Judge, the lamesauce cantilever will be replaced soon with a Wilcox mount. Also, I gave in and painted her up after seeing this picture (link below). I'll post updated pics in the next day or so. www.abload.de/img/sealguncasejfpg.jpg |
|
|
|
Post by Paranox on Oct 12, 2010 21:54:28 GMT -5
Looks real nice bro, looking forward to seeing it painted.
|
|
|
|
Post by Ghast on Oct 13, 2010 15:35:36 GMT -5
Hey Leggionaire, What make and model is that? I have a long-ish stock tube li-po I can sell ya for cheap. Although, you'd still need a balancer/charger. Let me know.
On topic, Love the gat. Very HSLD but without the racecar stuff on it. The gun seems all Business. Keep up the good work.
|
|
