Magpul MOE Handguard?

[Moop]

So I'm thinking about getting the Magpul MOE handguard. My only dilemma is that I'm not sure what batteries it's capable of holding. My searches haven't brought up any helpful advice.

Here's the battery I have (I'm 99% sure it won't fit):

www.airsoftgi.com/product_info.php?products_id=2772

Here's the battery I want to get for the handguard:

redwolfairsoft.com/redwolf/airsoft/ProductDetail?prodID=27244

Sometime in the future I'll hopefully be getting a lipo in the buffer tube but until then one of these needs to suffice. Thanks.

[Paranox]

Moop that first battery will not be fitting but the second one will.

[Moop]

Thanks. That's good to know. I was hoping not to have to use an 8.4v.

[Fox]

You could always use one of these....

www.airsoftpost.com/product_info.php?cPath=31_171&products_id=31126

[Moop]

I probably will be switching to a lipo in the future. But I'd prefer to stick with the standard battery for now. Thanks anyways.

[Timm]

In my handuards, on my Real Steel, there's the metal heatshield that runs all the way thru the handguards. Pretty sure they won't be able to hold a battery...

[Kiki]

Yes, but the Magpul PTS MOE handguards are able to fit a battery (they removed the heatshield).

[trustkill]

Feb 18, 2010 1:10:45 GMT -5 Kiki said:

Yes, but the Magpul PTS MOE handguards are able to fit a battery (they removed the heatshield).

This is the key: "Professional Training and Simulation." The other stuff is Real-steel.

[Moop]

I just got the hand guard today. The heat shield is absent, being the PTS version, and it fits the second battery I linked to perfectly. Only problem I'm having is the top piece is impossible to remove. Not really sure why, probably just needs to be worn in.

[magpul]

I know this is late, but I have your first battery and the moe handguard. Fits really snug.

[cqbr]

Just for the record, if your PTS ones didn't fit properly and you wanted to try the RS versions, you can easily remove the heatshield in them just by prying them out of their little injection molded "pegs". It takes about 30 seconds.