|
|
Post by dannydodge on Mar 1, 2009 0:53:54 GMT -5
Ok guys here's whats going on. Bought a JG Bar-10 used, was slam firing, the seller though it was either the piston sear or piston. First i replaced the sear.... still would NOT cock back and hold. Then i bought a new piston, couldn't find a stock replacement so a Laylax bar10/vsr10 piston was installed. Much to my dismay its still not working.  does ANYONE have any idea on what i could be?? trigger sear maybe?  Any help would be appreciated, im by far no expert on this stuff. |
|
|
|
Post by Crazyman™ on Mar 1, 2009 8:56:01 GMT -5
Solution... replace it. I wouldn't put much money into a gun than can be had for dirt cheap. It's smarter to replace them.
|
|
|
|
Post by kustom on Mar 1, 2009 10:28:06 GMT -5
You were..... SLAM FIRING..... A........ BAR-10..........
Nuff said.
|
|
|
|
Post by Livonia on Mar 1, 2009 10:33:31 GMT -5
He means it was slam firing. You can't slam fire it, its bolt action.. if you held the trigger it would not cock at all. Your solution would be a new trigger sear. Years ago when I had a Gspec my trigger sear broke, you could only tell from opening the trigger unit, have you done so to look? There should be a crack on the underside of it. I bought a new piston, and spring guide stopper thinking it was those, I already had an upgraded piston sear so it was pissing me off like how I'm sure you are. You will need this. www.airsoftgi.com/images/VSRtrigsear.jpg?osCsid=qqjma2vrqpv6fr76noo9vt83g3But I would suggest a complete trigger unit. Good thing you got all those other goodies though. |
|
|
|
Post by dannydodge on Mar 2, 2009 0:53:12 GMT -5
He means it was slam firing. You can't slam fire it, its bolt action.. if you held the trigger it would not cock at all. Your solution would be a new trigger sear. Years ago when I had a Gspec my trigger sear broke, you could only tell from opening the trigger unit, have you done so to look? There should be a crack on the underside of it. I bought a new piston, and spring guide stopper thinking it was those, I already had an upgraded piston sear so it was pissing me off like how I'm sure you are. You will need this. www.airsoftgi.com/images/VSRtrigsear.jpg?osCsid=qqjma2vrqpv6fr76noo9vt83g3But I would suggest a complete trigger unit. Good thing you got all those other goodies though. exactly, sorry for the confusion, and thanks for the help. |
|
|
|
Post by spiceyp on Feb 23, 2010 16:49:36 GMT -5
I would prbably replace it cause I dont have a store around my house where I can buy parts to replace with
|
|
|
|
Post by Chaos on Feb 23, 2010 17:06:35 GMT -5
The last post in this thread was over 2 weeks ago and that is considered necro-posting or bringing up an old thread. Also, we require you to use the English an average sixth grader would use. This means spelling out words so they are complete and using periods. Please make sure to read all the stickies and forum rules.
|
|
does ANYONE have any idea on what i could be?? trigger sear maybe?
Any help would be appreciated, im by far no expert on this stuff.
