|
|
Post by shastamcnasty on Feb 27, 2009 23:00:55 GMT -5
Does anyone know if there are barrel extentions for the AGM MP-001 rifle? I can't find one anywhere.  |
|
|
|
Post by Thor on Feb 27, 2009 23:32:20 GMT -5
Does anyone know if there are barrel extentions for the AGM MP-001 rifle? I can't find one anywhere. It's a clone. I'm gonna go ahead and say... no. |
|
|
|
Post by shastamcnasty on Feb 28, 2009 22:49:12 GMT -5
Well thanks for the time you spent on that reply, but that really doesn't help me much. Even if its a clone is there an extension that will work?
|
|
|
|
Post by Thor on Mar 1, 2009 0:24:57 GMT -5
Well, upon a little bit of research, since the MP-001 is a clone of the Tokyo Marui VSR-10, most if not all of the parts for the TM will fit. There isn't an "extension" you can buy, you have to buy a longer outer barrel if you want to put a longer inner barrel in it. Here are all the parts you might want: www.airsoftatlanta.com/parts_vsr10.htmThe outer barrels are near the bottom. Otherwise, what you could do would be to buy the silencer adapter and screw a long silencer onto the end. You should be cautioned however, that there is no guarantee that the TM parts will fit on your gun. |
|
|
|
Post by shastamcnasty on Mar 1, 2009 16:53:16 GMT -5
Thank you very much! You have helped exponentially.
|
|
