|
Post by Legionnaire on Apr 11, 2011 6:10:46 GMT -5
Prolly wove the molle on the MAP around the center back piece of the 1961. Indeed I did. Also, unclipped the strap piece that goes across your lower back. There are two small male clips on the bottom of the MAP, and two of the perfect size female clips on the 1961a. It's a little jury rigged but it works. And trust me, it's not made out of paper I have nothing else to say.
|
|
Colt
New Member
Colt - Not Just a Peacemaker
Posts: 195
|
Post by Colt on Apr 22, 2011 20:38:59 GMT -5
I guess I can add my gear into the mix. Please excuse the low quality. My Droid didn't like the amount of light in the room. It's a Condor Modular Chest Set. It has six built in mag pouches and hydration carrier. I added a ALICE Butt pack, a modified first aid pouch to hold my radio until my radio pouch arrives, along with a rollie pollie dump pouch and a condor map pouch. Since the photo, I added a Matrix Tactical Velcro panel. I have a fake one point sling and a real SERPA on the way that goes with the not real drop leg platform. Front: Left: Right: Back: Tell me what you think guys! I also have a Tan Condor MPS that I can throw up next week when I go home from college.
|
|
|
Post by Coldwave on May 8, 2011 18:02:21 GMT -5
By lfinkbeiner at 2011-05-08 By lfinkbeiner at 2011-05-08 By lfinkbeiner at 2011-05-08 By lfinkbeiner at 2011-05-08 Either Fox, or Condor OD PC. (can't remeber ) 3 double M4 mag pouches, OD admin Pouch, OD utility pouch serves as makeshift med kit. Topped off with a custom ID badge (I got bored last weekend)
|
|
|
Post by Ike on May 15, 2011 11:50:29 GMT -5
|
|
|
Post by snafu on May 15, 2011 20:42:55 GMT -5
Damn coldwave I really like that m16. What brand is it? I don't recall ever seeing that stock on an A2 before.
|
|
|
Post by Devil on May 15, 2011 20:57:55 GMT -5
I'm pretty sure he put it on himself.
|
|
|
Post by Coldwave on May 15, 2011 21:14:10 GMT -5
Snafu, believe it or not it's a JG. Devil you are correct I bought it from marshy and slapped it on!
|
|
|
Post by Shanker on Jun 4, 2011 19:04:32 GMT -5
Here's my Flyye RRV with my Pantac MAP.
|
|
|
Post by Knief on Jun 4, 2011 19:49:51 GMT -5
I just picked up a Pantac RRV and have a MAP from my CIRAS. How are you planning to attach your MAP to the RRV? Something other than zip ties and duct tape?
|
|
|
Post by Shanker on Jun 4, 2011 20:00:59 GMT -5
What I do is just take the backpack straps on the MAP, unclip them and put it through the top elastic strap (under the left side of my helmet) and clip 'em up. Edit: Here's some pics to help (sorry about quality its dark now and the lighting in my house sucks).
|
|
|
Post by Knief on Jun 4, 2011 20:08:37 GMT -5
Does that stay pretty secure then, or do you get a lot of flopping with a full hydration bladder?
|
|
|
Post by Shanker on Jun 4, 2011 20:31:42 GMT -5
It does stay pretty secure, not as good as it would if it was on by MOLLE, but I don't notice it when I'm running around.
|
|
|
Post by snafu on Jun 4, 2011 21:22:53 GMT -5
|
|
|
Post by Chaffin on Jun 4, 2011 21:54:02 GMT -5
Yes, RRV's can be used with MBSS backs. I currently have an MBSS, and wouldn't go to anything else.
|
|
|
Post by Knief on Jun 4, 2011 22:23:26 GMT -5
Like chaffin said, you can use the MBSS back plate with the RRV. I'll probably do that eventually but for now, I don't have one and don't have the money for one so I've got to rig up the hydration some other way.
When you're pairing the RRV with the MBSS back plate, you've got to consider how big of a guy you are. Because the RRV wraps around to the side farther than the front of an MBSS, when you clip on the MBSS back plate, you can only get the waist so tight on the whole rig. My brother-in-law has the RRV with the MBSS back plate and a 28-ish inch waist. The thing is huge on him. We padded him with some fake plates and cinched the whole thing up with some duct tape but it's still big. I have a 32-34 inch waist and when I tried his vest on, I needed just about as tight as it would go.
So if you're a small guy, that combo might be the wrong way to go. Just an MBSS or a RRV without the back panel would probably be a better fit.
|
|