|
Post by Stinger on Sept 19, 2014 12:45:53 GMT -5
Bishop (Task-Force Nightmare), I noticed you are using a ProWin. What hop-up bucking and inner barrel are you using with it? I'm trying to match my hop-up unit sealing perfectly, and the Lonex bucking which came stock in my M4 is too thin to fully seal. Prommy purple bucking and a bravo steel 407mms tbb. Sent from my SCH-I535 using proboards Thanks, I've been thinks about getting the Purple and I figured it would pair nicely with a Prommy barrel. Expensive, I know, but I've never heard bad things about either of those.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Sept 19, 2014 12:47:25 GMT -5
A good practice is to rtv your bucking to the barrel anyways. It will ensure perfect seal but it is fully reversable since the rtv will just peel off. Just slide on the bucking, then fold back the front edge and apply a thin bead of rtv to the barrel making sure that it does not get near the hop up window. Then just roll the folded front edge down onto the rtv and let it dry.
|
|
|
Post by Caboose on Sept 19, 2014 15:44:30 GMT -5
Took forever to get this build together. Finally just decided to put it into a Combat Machine shell.
|
|
|
Post by Bishop (Task-Force Nightmare) on Sept 19, 2014 17:01:16 GMT -5
Prommy purple bucking and a bravo steel 407mms tbb. Sent from my SCH-I535 using proboards Thanks, I've been thinks about getting the Purple and I figured it would pair nicely with a Prommy barrel. Expensive, I know, but I've never heard bad things about either of those. Actually upon further inspection I dont have a prommy bucking anymore or a flat hop. Airsoftgis tech spencer took mine out and replaced it with some other bucking and a generic nub without my consent. So now I'm running a mapleleaf bucking in my ProWin, but I highly recommend the prommy bucking. Sent from my SCH-I535 using proboards
|
|
|
Post by Stinger on Sept 19, 2014 19:02:09 GMT -5
Thanks, I've been thinks about getting the Purple and I figured it would pair nicely with a Prommy barrel. Expensive, I know, but I've never heard bad things about either of those. Actually upon further inspection I dont have a prommy bucking anymore or a flat hop. Airsoftgis tech spencer took mine out and replaced it with some other bucking and a generic nub without my consent. So now I'm running a mapleleaf bucking in my ProWin, but I highly recommend the prommy bucking. Sent from my SCH-I535 using proboards That is fucking stupid. Sorry man I don't trust large companies with my stuff for that very reason, among others.
|
|
Prophet501
New Member
Hey bro, it's Milsim!!!
Posts: 113
|
Post by Prophet501 on Sept 20, 2014 8:34:00 GMT -5
Caboose, that Noveske rail is sick. I almost wish I bought the FMG4 variant with the Noveske rail instead of the Daniel Defense one I did get.
|
|
|
Post by Timm on Sept 20, 2014 8:56:18 GMT -5
It's clean, caboose. Nicely done, sir.
I like clean.
|
|
|
Post by snafu on Sept 20, 2014 11:30:23 GMT -5
Yeah that looks really good!! The rail, the flash hider, the mag, and the ACOG. All go perfect together.
I'm really yearning for an m16 length AR these days. I think it's time to build an m16 upper for the G&P.
|
|
|
Post by Stinger on Sept 20, 2014 11:38:22 GMT -5
Caboose, that Noveske rail is sick. I almost wish I bought the FMG4 variant with the Noveske rail instead of the Daniel Defense one I did get. I have that FMG4. It's very nice.
|
|
|
Post by Caboose on Sept 20, 2014 12:05:00 GMT -5
Thanks guys. My first rifle was a JG M16A2, and ever since it broke I've debated about getting another M16. It just took four years for it to happen.
|
|
|
Post by Deacon on Sept 25, 2014 15:52:26 GMT -5
Yep. Finally got it internally ripping like a crackhead on meth.
|
|
|
Post by voodoo on Sept 25, 2014 16:12:32 GMT -5
Very nice! I prefer MK18's, but VERY nice! What numbers are you getting for distance and RoF?
|
|
|
Post by Deacon on Sept 25, 2014 16:21:39 GMT -5
1.56 Joules 405fps (.20g ksc/kwa bb's on a Xcortech3200 V2) Barrel/hop is stock while I wait on the rHop patches to come in. Internals: Guarder SP-110 Spring SHS 14 Tooth Lightweight Piston (Metal rack) Lonex Piston head Super Shooter 14:1 gearset SHS High-Torque Motor BTC Chimera Mosfet
|
|
|
Post by Stinger on Sept 25, 2014 16:26:19 GMT -5
Super Shooter 14:1 gearset What happened to the Siegetek gears?
|
|
|
Post by Deacon on Sept 25, 2014 16:39:59 GMT -5
Not using them in the VFC anymore.
|
|