|
|
Post by Timm on Jan 22, 2006 16:54:56 GMT -5
Mabey some gloves...........
|
|
|
|
Post by Great Troub of Troubistan on Jan 22, 2006 17:19:09 GMT -5
Yeah, gloves and a rail guard should do it if you do not like Vertical Grips.
Getting an m203 to solve the problem of your hand hurting is like cutting off your arm because you have a cut.
|
|
|
|
Post by Enkidu on Jan 22, 2006 17:33:07 GMT -5
Getting an m203 to solve the problem of your hand hurting is like cutting off your arm because you have a cut. Naw, it's more like cutting off your arm and replacing it with a robot arm that shoots grenades and ice cream and thong panties. |
|
|
|
Post by SWAT A4 on Jan 22, 2006 19:57:53 GMT -5
No one caught on that it was a joke.....  I was just trying to givemyself another reason to buy the 203. I have nothing else to say. |
|
|
|
Post by Great Troub of Troubistan on Jan 22, 2006 22:12:44 GMT -5
Would you get the 203 that covers the RIS with that heat-sheild.
|
|
|
|
Post by Jacko on Jan 22, 2006 22:13:55 GMT -5
The heat shield wouldn't fit over the RIS.
|
|
|
|
Post by Bigmack on Jan 22, 2006 22:43:29 GMT -5
Which rail system is that?
|
|
|
|
Post by SWAT A4 on Jan 22, 2006 22:50:55 GMT -5
I don't like the heatshields anyways, It will look good without it. I just payed 180$ for that RIS, trust me, I want to let it be seen anyhow. I have nothing else to say.
|
|
|
|
Post by Bigmack on Jan 22, 2006 23:21:25 GMT -5
Is the RIS on 90degrees off? Seems like theres a cut-out on the RIS for the front sight post....and the T-numbers are usualy on the top surface.
|
|
|
|
Post by SWAT A4 on Jan 23, 2006 17:12:09 GMT -5
Nope, I don't know what you see. But Don't think im that dumb, each rail is labeld, T=Top, R=Right, L=Left, and B=Bottom. Can't screw that up. And the cut out.. well.. that's just the way it is. I dont like it, nor do I mind it.
It's the standard CA M15 RIS.
|
|
|
|
Post by Bigmack on Jan 23, 2006 22:01:18 GMT -5
Usually the cut-outs in a RIS are for...say... an M4. You'd have basically a Disapator look...with the front sight post set back 3 inches into the RIS...
Thats the only reason i ask.
|
|
|
|
Post by Great Troub of Troubistan on Jan 24, 2006 8:45:31 GMT -5
The heat shield wouldn't fit over the RIS. What I meant was would he switch out the RIS for a heat-sheild. However, he answered that...Anyways, that thing is going to weigh a ton. |
|
|
|
Post by SWAT A4 on Jan 24, 2006 17:18:38 GMT -5
I have nothing else to say, Yeah it is at 7lb stock gun..... Plus a one pound ris, a 9.6v battery, and dual mags.... So, Over 9lbs already. Hahaha, It's going to be a very heavy gun, But i'm used to lugging nitro tanks around on my gun for paintball, so It wont be a problem.
|
|
|
|
Post by Great Troub of Troubistan on Jan 24, 2006 18:19:23 GMT -5
In paintball you don't have to aim. The fatigue may make your hands shaky, and you may not be able to aim well.
|
|
|
|
Post by SWAT A4 on Jan 24, 2006 19:02:15 GMT -5
Ah, 400 fps fully auto and m203 can be my aim for that situation.. I'm not sure what I'm going to do as for gear right now, I still plan on dropping some weight off my mp5 and putting that on my back... But, I'm thinking a bipod will be my alternative to the m203 if i get tired, just snap it off, and snap the bipod on. Less weight, increase aim.
But I was just saying my arms wont get tired, I have the energy for that already. A couple of 24 hour long games have taught me not to get tired.
|
|
