|
Post by RichieRich on Sept 9, 2005 12:39:02 GMT -5
|
|
|
Post by DarkRyderOmega on Sept 9, 2005 13:38:04 GMT -5
Nice...
Id say get a solid stock for it. That would make it so much cooler, plus you could have a bigger battery!
|
|
|
Post by RichieRich on Sept 9, 2005 16:29:49 GMT -5
Im new at this but... The first upgrade I have in mind for it is a M100 or M110 Spring! That dosn't need anything else upgraded internaly does it?
And also anybody know what I need for a barrel extention, with a silencer? Curent barrel is 285mm but I want something a bit longer. Can you get Silencer setups so the inner barrel goes right to the end of the silencer or is the silencer just somethin you put on the end, similar to the flash hider?
|
|
|
Post by Gestapo on Sept 9, 2005 16:34:46 GMT -5
for any upgrades its smart to get some metal bushings. The nylon ones that are in the stock guns can deform under the higher pressures from upgraded springs, causing a catastrophic failure. Most "silencers" just screw on to the threads that are on the end of the barrel and they dont include a longer inner barrel, but you can buy one and slide it through if you are looking for a longer barrel.
|
|
|
Post by RichieRich on Sept 9, 2005 18:58:28 GMT -5
ok thanks Geb
|
|
|
Post by Great Troub of Troubistan on Sept 11, 2005 6:29:37 GMT -5
Its actually GEStapo. He just uses fonts that don't actually translate into any known english writing style.
Anyways, I need to ask what is that large metal screw doing on the side of your replica! I have owned a USP gbb and seen the springers. Yet I have never seen that large metal screw in the side of the replica.
|
|
|
Post by Gestapo on Sept 11, 2005 12:07:56 GMT -5
He probably lost the take down pin, so he used a bolt By the way, ß in German is the English equivalent to "ss"
|
|
|
Post by Great Troub of Troubistan on Sept 11, 2005 12:40:31 GMT -5
Gestapo, I know this. That is why I said english style. I misused translate though, I meant read into. As you can not possibly read that with out knowing advanced german grammar to realize that is GeSStapo.
Niemand wird den witz erhalten, dass es geSStapo recht sagt?
|
|
|
Post by Gestapo on Sept 11, 2005 13:54:42 GMT -5
haha, no i dont think they have.
|
|
|
Post by Grunto on Sept 11, 2005 14:19:39 GMT -5
I took german when I was in middle school and we learned about the double S like the first week.
|
|
|
Post by Ballista on Sept 11, 2005 16:01:03 GMT -5
Or as Ballista knows it, a "weird Greek symbol".
|
|
|
Post by navman908 on Sept 11, 2005 16:27:46 GMT -5
i would reccomend putting a full stock with a large battery on it at first. That is what i did with mine and it greatly improved the rps, fps, range, and so on. I have not yet put any other upgrades into mine, but am looking into a guarder foregrip with rails for $60 at 6mm shop
|
|
Rogue1
New Member
TM-MK-23,SD-5,SD-51,MP-5A5,G-36c,MP-5K,MP-7,Beta-S,VFC HK416,Hudson M3A1,WA GSR,KSC G-18,USP-C
Posts: 839
|
Post by Rogue1 on Sept 11, 2005 17:51:38 GMT -5
well, i already chipped in some advice on the silencer/barrel thing but since i started out with a stock MC-51, the first time i skirmished with it, it ran fine but the 8.4v mini battery did not last very long(i had no trigger dicipline when i had the hi cap mag in!!??) and changing batterys in the middle of a heated fire fight was no fun. i agree with navman and a bigger battery was in order, went with the guarder front foregrip and a 9.6 v 1100 mah dropped right in. it had the side and bottom rails to mount a surefire light and i even added a cheap laser and the vertical foregrip that came along with it. it solved most of the few shortcomings and the 9.6 v gave it one hell of an upgrade(range, rate of fire) without changing the internals (that came later) and it was still compact in overall length as i was doing a lot of CQB at that time. adding the full stock as navman suggested will do all that but adds more length so either way, a nice piece of work!
|
|
|
Post by Great Troub of Troubistan on Sept 11, 2005 23:08:25 GMT -5
I took german when I was in middle school and we learned about the double S like the first week. I am self-taught. Anyways, I really want to see this thing when it is all done. What would be nice, is if you put some od furniture on it.
|
|
|
Post by RichieRich on Sept 12, 2005 9:43:45 GMT -5
Yeah That USP is just a crapy plastic springer and the side pin fell out so I just put a bolt in it. Curently Im using a 8.4v 1100, and just the standard mag. Planed Upgrades JUST LTF $43 www.airsoftretreat.com/features/reviews/just%5Fhandguard/M120 spring9.6v 1700 twin typeCA BushingsWill all of that work? The Just Grip says it holds a large battery but dose anybody know if that 9.6v 3000 will work? its an 8cell so I THINK it will work but dunno... could you MC-51 guys posibly post some picks? Thanks for the feedback!
|
|