tabomabi
New Member
TM MP5- SD6, KJW Glock-26 GBB
Posts: 80
|
Post by tabomabi on Feb 4, 2002 19:27:46 GMT -5
I've only had my TM sd6 for a week and the cocking lever already broke! I wasn't being forcefull with it, all i did was pull it back and it snapped right off. I e-mailed Eddie from airsoft shop for a replacement peice and he said it was my fault, but he could send me another one for $10 (which is essentailly buying another one). I really think that Marui should put at least a 30 day warranty or something on their products. Any who, does any body have a good site to get a new lever from, or have one they could sell?
|
|
Ed
New Member
Retired
Posts: 630
|
Post by Ed on Feb 5, 2002 18:17:43 GMT -5
A lot of metal on AEG's are cheap. I have an ICS metal body and few "fill in" parts of the body were mad out of like pot metal or something...very cheap.
Just buy the new peice. It's the best way.
|
|
tabomabi
New Member
TM MP5- SD6, KJW Glock-26 GBB
Posts: 80
|
Post by tabomabi on Feb 5, 2002 20:11:47 GMT -5
Yea, well i took some heavy duty super glue that comes in a tiny bottle and glued it back together. It said on the bottle that it glues pottery, paper, etc...and metal, so i just can't whack it on any thing or it will come off again, but it should be fine for now.
|
|
retraw
New Member
Death from wherest thow cannot see.
Posts: 155
|
Post by retraw on Feb 10, 2002 23:20:58 GMT -5
use JB weld. then grind and file and sand and paint. My stock on the pdw snapped right in half. I used jb weld.
|
|
