|
Post by Andy on Oct 16, 2002 5:33:48 GMT -5
I know you guys are right. I'm just being too lazy about my posts. I'll be more carefull what I type.
I knew yal were talking about how the gun comes. I ment that I have heard of when people get upgraded mech boxes their mags don't feed that well and every once and awile when you shoot nothing comes out.
Is that better?
|
|
|
Post by Minky on Oct 16, 2002 9:20:20 GMT -5
That's better, but still wrong, I have nothing else to say. Unless the nozzle or tappet plate is out of alignment, or your gears are not timed correctly, your mechbox should load BBs no matter what upgrades are inside it. I don't see how upgrading a mechbox would cause the magazine, which is completely unrelated, to fail to feed. Maybe if you were using a 12v battery or something and the gun cycled faster than BBs could load, then you might have a problem....
|
|
|
Post by Bigmack on Oct 16, 2002 10:50:43 GMT -5
...and every once and awile when you shoot nothing comes out. bullshit. 'nuff said.
|
|
|
Post by gREENcOW on Oct 16, 2002 13:13:14 GMT -5
The gun! The gun I say! Are G3A3's any good? Or would I be better off to just save myself the extra 10, 20 or 30 bux and just go for the XM or MP5?
|
|
|
Post by Andy on Oct 16, 2002 14:26:35 GMT -5
Bigmack and Minky, I have nothing against you two. I DO NOT know how it works. Hence the reasion I said meaning that I was told this. 3 guys from www.airsoftcanada.com/yabbse/index.phpI was member there 2 years ago. I was just passing down what I heard. I tryed t find the posts but no luck.
|
|
|
Post by SickPointe on Oct 16, 2002 15:13:45 GMT -5
a lot of those Canadians on that board are disrespectful and mean. I left those boards because of a few rotten apples.
|
|
|
Post by Jacko on Oct 16, 2002 15:15:50 GMT -5
Not to point fingers, but not everyone on here is all peaches and cream either. I get a little pissed at some of the responses I see given and I'm not even the one they're talking to.
|
|
Blorfo
New Member
Back to Banville
Look! I'm not causing trouble this time!
Posts: 766
|
Post by Blorfo on Oct 16, 2002 15:19:51 GMT -5
*Eats Sick's eyes*
You mean those, Jacko?
|
|
|
Post by Jacko on Oct 16, 2002 15:26:52 GMT -5
No, those are funny as hell, Blorfo. I think it's just a case of people not realizing they're on the Net and not indicating that they're kidding.
|
|
Blorfo
New Member
Back to Banville
Look! I'm not causing trouble this time!
Posts: 766
|
Post by Blorfo on Oct 16, 2002 15:33:11 GMT -5
Oh. Well then. *Tears off Andy's leg, beats him with it*
|
|
|
Post by Andy on Oct 16, 2002 16:31:57 GMT -5
I crackup every time Blorfo! ;D
|
|
|
Post by Andy on Oct 16, 2002 16:34:12 GMT -5
Back on subject, gREENcOW, all the guns are great no matter what they are. They all have Pros and Cons.
|
|
Blorfo
New Member
Back to Banville
Look! I'm not causing trouble this time!
Posts: 766
|
Post by Blorfo on Oct 16, 2002 17:52:52 GMT -5
|
|
|
Post by Knief on Oct 16, 2002 18:38:06 GMT -5
To be a little more descriptive than andy's half info post... All tm aegs (sans psg-1) share comperable performance, durability and reliability. There are no outliers. i exclude the psg-1 because it has a very different mechbox. not only is it semi auto only, but it windes up after each shot, and not before like most aegs. every series of aegs has some problems, but all are fixable. The m16 series is plagued with barrel wobble, p90 hicaps don't work all that well, the sig series has a problem with the burst circuitry. The g3's have the problem of chassy flex. it can be fixed fairly easily with any number of rigidity enhancing (not like that) products. Newman mentioned something about duct tape a while ago, but he never elaborated. maybe he or someone else can elaborate on that. Other than that problem, the g3 series has the same performance as pretty much every other gun. the key factors are battery size, barrel length, and how comfortable you'll be with the gun. the barrel length and the battery size can be remedied on any gun for whatever you desire, so the biggest factor in what gun you buy is how it feels to you. if you can get a chance, head over to www.wolverinetactical.com and find the adress to their walk in store. go there one time and see how some guns feel to you. failing that, head on over to a game near by (you're welcom at any FLAG game if you want to make the drive) and hold a few. basically, if you see yourself running through the woods with an mp5, then go for it. if you see yourself with a big hulking gun like a g3, then get that. You have to get whatever gun you want, and if you don't get that gun you want as your first gun, it will be your second, or your third. you won't be happy until you've got that gun. exapmle, a member of flag wanted to mod himself an sr into a sniper rifle he saw on redwolf. I talked him out of it so he could see what he liked before he spent the money on the sniper rifle. he then bought an ak. Now he owns an sr and almost bought an m130 FTK to be at the sniper limit for FLAG. You get my point, i'm sure. get the gun you want or you will pine after that gun until you get it. for me, i happened to land that gun in the first shot, and i've never wanted a second (that's out right now, i'm deffinetly gettin the g36c when it comes out).
|
|
derick
New Member
For a good time call - 867-5309
Posts: 566
|
Post by derick on Oct 16, 2002 18:42:06 GMT -5
no, g3a3s are crap, they are light and flimsy, my friend chris(tons o' fUN) has one and I absolutely hate it, its long and light, i think it weighs the same as my pistol. buy a xm or m4 or mp5 or something
|
|