MaxPayne
New Member
" I just found out that I can do nothing and get paid the same for it!"
Posts: 58
|
Post by MaxPayne on Apr 24, 2003 10:15:12 GMT -5
Okay, I know this is a totally noobish question, but I geuss thats why there's a newbie forum ;D. Is there any upgrades possible for an mp5 sd3?
|
|
|
|
Post by dicepackage on Apr 24, 2003 13:26:52 GMT -5
Since this is in the newbie forum I will assume you mean the spring UHC MP5 SD3. You can get a scope mount on it. Here is a picture of the mount airsoftshop.polyactive.net/scope/smokeak47scopemountbase.jpg. I have one of these for my AK-47 that can also be used on my MP5-SD3 or any Marui MP5. I wouldn't recommend it since it takes far too long to aim and the bb's tend to be so inaccurate that they never even hit what is in the crosshairs. If you have another mag you could get a dual mag clamp and tape the end of the second mag shut. There is a laser site I remember seeing somewhere designed to attach to the silencer part of the gun. You can get a sling for the gun even though there aren't any mounts. I have a universal sling where one end is connected near the mag portion and the other is in the stock. If you go put the sling in the stock then you won't be able to lock it into place when it is in its closed position. Other then that there aren't many upgrades available for the spring version. If you decide to get any Marui MP5 there are loads of upgrades. |
|
MaxPayne
New Member
" I just found out that I can do nothing and get paid the same for it!"
Posts: 58
|
Post by MaxPayne on Apr 25, 2003 9:43:07 GMT -5
Thanks Dice. P.S.- I meant the spring version  |
|
