Can I put a better spring in my super 9.

[FireBird]

My super 9 shoots pretty good but lacks in accuracy and FPS. I don't even know if i can get apart the bolt assembly to replace the spring but it is worth a try. I need to know what spring to put in it if I even can.

[Ed]

Yes.  I did.  You can put in any PDI APS-2 spring.  It's hard to take the bolt apart but in half an hour you will have the fastest Super-9 on the block.  It'll do nothing for your accuracy.  I could hit a man sized target with my Super-9 at around 70 or 80 feet (like an AEG).  I was shooting without wind and with a bipod however.

[dicepackage]

The Super 9 is really horrible originally unless you mod it.  There is a side hop up so the bullet goes way off to the right or left.  I changed this so it would stay center by taking off the plastic causing it to spin sideways.  Hope this helps you snipe more accurately.

[Ed]

oh wait, remember that the harder spring you put in it, the harder it is to pull back.  I got a 200% spring in my S-9, and the plastic cocking handle is getting weak.  It might break off soon so I try to limit it's use.

[Minky]

WGC has the PDI springs, which they label as working in the Super 9, towards the bottom of the page: www2.wargameclub.com/cgi-bin/cart/shopper.cgi?cat=cat_category_PDI%20Springs

[FireBird]

Thanks a lot everyone for your input. I really appreciate it.