zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 17, 2014 14:49:10 GMT -5
Thanks everyone. I think I may just buy a new tappet plate and spring. Does anyone have any suggestions for a replacement?
|
|
|
Post by Stinger on Oct 17, 2014 15:45:04 GMT -5
Thanks everyone. I think I may just buy a new tappet plate and spring. Does anyone have any suggestions for a replacement? If it is compatible with V2 tappet plates, I recommend the Lonex V2 Enhanced Tappet. I've used them in literally everything I've built. A good (and cheaper) alternative would be the SHS V2 Tappet. Both are under $10 and both are made of glass-fiber-filled nylon.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 19, 2014 11:39:26 GMT -5
|
|
|
Post by Stinger on Oct 19, 2014 13:49:32 GMT -5
Get everything from Brill Armory here: www.brillarmory.com/The prices tend to be better and you'll save on shipping (everything will come from the same place). As for whether or not that stuff will fit: I have no idea. I don't know very much about Masadas.
|
|
Roger Monk
New Member
Just call me monk ... please
Posts: 451
|
Post by Roger Monk on Oct 19, 2014 13:52:21 GMT -5
Massada's have a ver. 3 gearbox?
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 19, 2014 14:07:29 GMT -5
It's considered a hybrid gearbox, it's the version 2's shape, but a little bit elongated. Also, it has a motor cage attached.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 19, 2014 14:11:48 GMT -5
So, is there a size difference between a version 2 and 3's cylinder? Because I know I need a longer cylinder nozzle, and most of them are v3s.
|
|
T6e9a
New Member
Back in business
Posts: 911
|
Post by T6e9a on Oct 19, 2014 19:19:51 GMT -5
Cylinder nozzle? Or cylinder head nozzle?
On brill they sell a few different cylinder heads, some of which have a longer nozzle tube on the cylinder head(generally for g36), other are just standard size. Make sure your gearbox can take the style of head for the elongate one. And worst case, you can trim it down to just long enough if its too long.
But I second CS with ordering from brill. Prices are very reasonable, and shipping from the same place, generally within 2 days of your order iME.
|
|
|
Post by Stinger on Oct 19, 2014 20:08:17 GMT -5
But I second CS with ordering from brill. Prices are very reasonable, and shipping from the same place, generally within 2 days of your order iME. And the owner, Louis Brill, is a very cool guy.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 20, 2014 12:51:34 GMT -5
So I ordered an elongated SHS ver.3 nozzle from eHobbyAsia. I plan on getting all the other parts I need from brill. Thanks guys.
|
|
T6e9a
New Member
Back in business
Posts: 911
|
Post by T6e9a on Oct 20, 2014 14:00:51 GMT -5
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 20, 2014 16:29:46 GMT -5
I do not need a new nozzle, the old one is in perfect condition. Also, that is not the cylinder head I purchased.
|
|
T6e9a
New Member
Back in business
Posts: 911
|
Post by T6e9a on Oct 20, 2014 19:03:24 GMT -5
I am aware of that. It's just your wording in the last few posts hasn't been all that clearly understandable. (Mix up with the cylinder head, nozzle, etc)
But regardless, I'm sure what you ordered should work with little to no modification.
|
|
zephurah
New Member
Not sure how I feel about my status.
Posts: 187
|
Post by zephurah on Oct 31, 2014 21:22:24 GMT -5
Good news everyone! After extensive amounts of hours, $50 and some elbow grease, the replica works! However, there is one small remaining issue. It lies inside the hop up unit itself. You see, there is a trade off occurring. When the feeding nozzle is looked through, you can clearly see the outline of a bucking. The bucking in this case is actually inhibiting the bbs from entering the hopup chamber. Now, if shimmed, the bucking sits slightly forward, but the resulting gap between the air nozzle and the bucking drops the fps from about 350? to about 250.
|
|