|
Post by ftcoolio on Mar 1, 2014 13:57:01 GMT -5
Hi I own a CM046 AK47 AEG made by CYMA, independently the gears will spin and the motor will spin so all wiring is correct but when combined you hear the motor trying to turnover the gears and feel the twitch but nothing happens. If you know of anything that could be wrong please leave it here, thanks.
|
|
Deuce
New Member
Posts: 313
|
Post by Deuce on Mar 1, 2014 14:13:38 GMT -5
Are you using a decent battery, and is it charged? Weak batteries and dead batteries don't provide enough power to spin the motor and the gears. Also, have you tried moving your motor height? If your motor is too compressed with the gears it won't be able to properly spin. If everything within the gearbox is in the correct position, there shouldn't be a problem (unless you opened it recently). Have you toyed with your gearbox recently?
|
|
|
Post by Combat Junkies Airsoft on Mar 1, 2014 15:07:13 GMT -5
Also be sure you have the motor wires connected to the propper terminals.
|
|
|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 1, 2014 15:32:16 GMT -5
We need a little bit more of a back story here to try and help; #1 - What kind of spring are you pulling (M100, M110, M120, stock)? #2 - What kind of gears (standard 18:1, 20:1s, ect.)? #3 - What kind of motor (Stock, G&P M120, ect.)? #4 - What kind of brand, voltage, and mAh battery (Intellect 8.4v 1600mAh, ect.)?
|
|
|
Post by Kjones on Mar 1, 2014 16:14:50 GMT -5
This should be in the tech section. But I would say that there is a 90% chance that either your motor height is too high and binding the gears, or you have the motor wires backwards (positive the the negative terminal) and your motor is spinning the wrong way and hitting the anti reversal latch.
|
|