|
Post by Phantom Reaper on Apr 16, 2013 15:38:02 GMT -5
Maybe you want to 3d print the external modification parts, sand and fine tune them to fit gun perfectly, make a mold of the pieces with plaster, then use ABS resin to make the parts, attach parts and some metal accessories, then paint the whole thing. Just an Idea, probably wont be cheap; you'll have to research it and practice making things from ABS resin first. However once you've done all this you can make as many external kits as you want, just make more resin parts using the same molds. Thanks for the advice, I can tell you two things, 1. once I get the kit down it will look badass and 2. when I do I may make kits for other's G36K's once I get the kit refined
|
|
auzzie
New Member
NRPH and Fairlawn forever...
Posts: 523
|
Post by auzzie on May 3, 2013 12:40:39 GMT -5
|
|
|
Post by Phantom Reaper on May 6, 2013 13:28:50 GMT -5
Could a Mod Please Remove or lock this thread? Thank you.
|
|
|
Post by Gimpalong on May 6, 2013 13:53:08 GMT -5
phantomreaper,
No need to post in unactive threads. Just let them fall to the bottom.
|
|