|
Post by SideSwipe on Mar 17, 2013 16:13:29 GMT -5
Hey everyone,
I've been looking everywhere and it seems hard to come by coyote brown pouches/gear for my 6094. I want to stay away from multicam as it cost more so I've looked at possibly Condors Tan, but fear it would offset the look of the vest.
I have OD condor m4 triple mag pouches with the open-top retention strap and was hoping to find similar style in a color that would look great with my 6094...
Any suggestions ?
|
|
|
Post by Crapshoot on Mar 17, 2013 17:15:27 GMT -5
|
|
Sham
New Member
R14
Posts: 88
|
Post by Sham on Mar 17, 2013 17:45:50 GMT -5
There are tons of Coyote pouches on skdtac.com. If you are ballin on a budget; I recommend searching "eagle industries coyote" in ebay. You will find a ton of surplus stuff that is generally not over $20 an item.
|
|
|
Post by Knief on Mar 17, 2013 18:22:47 GMT -5
And if you just want to match FLYYE with FLYYE, you can get just about every pouch FLYYE makes in CB at www.shootercbgear.com. Shipping from Hong Kong to Michigan on just pouches shouldn't be too bad. I calculated it out to about $16 on six pouches to my house.
|
|
|
Post by SideSwipe on Mar 17, 2013 19:48:18 GMT -5
For mag pouches would you suggest a triple or two doubles for the front panel ?
|
|
|
Post by Crapshoot on Mar 17, 2013 19:53:12 GMT -5
I would recommend only one magazine per pouch, that way you'll be lower to the ground when prone.
|
|
|
Post by SideSwipe on Mar 17, 2013 20:02:56 GMT -5
I meant the pouches themselves. It seems that two duo mag pouches would fit across the front panel fine, however, I've only seen people center a triple mag pouch instead.
|
|
Sham
New Member
R14
Posts: 88
|
Post by Sham on Mar 17, 2013 21:44:16 GMT -5
Helmet runs four pouches on the front panel of his 6094 with no problem.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 17, 2013 22:24:11 GMT -5
First off, why not just use the kangaroo pouch with an insert to keep it low profile. If you need more mags put them on the cummerbunds to keep them out of the way.
I don't pay much attention to replicas, but the number of molle rows on the flap of the LBT 6094s actually varies with the size. The A size (medium) only has 6 rows of molle, and used to have a sort of half row on each side that makes it look like there are 8 rows, but the two half ones are not actually usable. On the B size (large) and up, I believe these two outside loops are actually full size.
If Flyye makes a clone of the large, then it may have 8 rows.
|
|
|
Post by SideSwipe on Mar 18, 2013 5:57:32 GMT -5
I shall look into it, thanks everyone :)b
|
|
|
Post by Gunny87 on Mar 18, 2013 14:21:42 GMT -5
On my 6094, I use not only an insert in my Kangaroo pouch to hold 3 mags, but I also carry two four magazine pouches on the front.
|
|
|
Post by SideSwipe on Mar 18, 2013 15:23:25 GMT -5
Any cheap inserts for M4 mags?
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 18, 2013 19:47:27 GMT -5
|
|
|
Post by SideSwipe on Mar 19, 2013 8:29:09 GMT -5
Do you know if the TMC quick mag insert functions or is junk? That would be a better alternative than the open top, I think.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 19, 2013 9:25:12 GMT -5
I don't really know but I think it will probably be fine.
|
|