|
Post by MayhemXXXFrosty (AndrewMp5k) on Mar 6, 2013 22:08:55 GMT -5
I recently ordered a similar flashlight to an Element (Replica) M952v that has the tail cap, along with a G&P Dual Switch. My question is if I can remove the pressure switch from the tail cap's adapter, so I can plug the Dual Switch into it (I don't want to break the flashlight if it's not supposed to separate from the silver adapter in the tail cap). Also, does anyone make a tail cap for something like the AIM L300 Green Laser so that I can have both in and able to be used with the pressure pad buttons. I guess I'm asking if they have something like this that would fit on the end of my green laser;
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Mar 6, 2013 23:32:07 GMT -5
You have two problems there. The dual switch you linked to is a replica of the real insight dual pressure switch for the insight peq 15 and m3x long gun. The clone one you have is made for a clone m3x and peq 15 (different connections than the real one). That dual switch that you ordered will not fit the replica surefire flashlight that you ordered or your laser. What you need for your flashlight is this shop.ehobbyasia.com/night-evolution-remote-dual-switch-2-plug.htmlbut that still won't work with your laser. If you want to use that laser you will have to do some splicing, or you could just get a replica peq 15.
|
|