|
Post by doaairsoft810 on Feb 25, 2013 20:51:31 GMT -5
Hey there guys, quick question. I have an H&K(G&G) MP5 with the full stock on it. The battery compartment and wireing is in the stock of it. Now i have a folding stock from my old MP5 that i would like to put on my new one. Does anyone have any ideas on how i could make this work. I'm up for anything because i do not like the looks of the full stock. Also, if i got an extendable stock with a buffer tube in it ment for an m4 or something would that work. Thank you.
|
|
MUSH
New Member
no reason to fight when you can play airsoft
Posts: 347
|
Post by MUSH on Feb 25, 2013 21:13:33 GMT -5
Re-wire it to the front.
|
|
|
Post by doaairsoft810 on Feb 25, 2013 21:24:58 GMT -5
That's how it was wired on my old one but the this one for some reason the in-line fuse is bigger and won't fit when i try to re-wire it. That was one of the first things i tried.
|
|
|
Post by Ghast on Feb 25, 2013 22:19:50 GMT -5
So take the fuse out. As long as you don't keep pulling the trigger when(IF) the gearbox locks up, you'll be fine.
|
|
|
Post by doaairsoft810 on Feb 25, 2013 22:28:51 GMT -5
Good idea. Any idea if an M4 retractable stock with a buffer tube would work? or if i could modify the folding stock to fit the wires out the back and mount it on the stock itself?
|
|
|
Post by Ghast on Feb 25, 2013 23:03:27 GMT -5
It wont work without custom fab, and it'll also look ugly as sin since it's not an Mp5K
|
|
|
Post by doaairsoft810 on Feb 26, 2013 23:37:07 GMT -5
Well i have the tri-rail off of a MP5A4 with a fore grip and a top rail with a red dot sight and flip down magnifier on it so it is tactically custom on the externals so i thought maybe it would look alright. Is there anywhere near Flint that has a certified airsoft tech that could help me out, or is Kalamazoo the closest?
|
|
|
Post by Ghast on Feb 26, 2013 23:44:27 GMT -5
Not with fabrication they won't, if you found an adapter then plenty of places on the East side of the state could order it for you.
|
|
|
Post by doaairsoft810 on Feb 26, 2013 23:51:41 GMT -5
Hmm i may just have to try and re-wre it again. Thank you guys for your help though.
|
|