|
Post by Tank on Sept 18, 2012 14:48:47 GMT -5
Well now I know why you were prodding me for exact dimensions X, laugh. Yeah, so a real steel milspec stock would likely fit, but just be a little loose. A commercial stock would be a bit more loose. If your going with a Magpul Stock the claim, on the KWA forums, is to just buy a Magpul PTS stock and you will be fine. I will measure my real steel stock tonight with the same calipers to determine exactly how well I measured my KWA stock.
I always struggle with determining how tight to squeeze the calipers down on something to take a measurement. I generally tilt it from side to side to determine the smallest measurement, then push it fully up against the thing being measured, and then I let go of the adjustment wheel so that it's no longer being squeezed by me. At that point I take the measurement. I don't know if this is how they are meant to be used or not.
What I measured was 1.138", milspec is supposed to be 1.148" and commercial is supposed to be 1.168". Keep in mind though, your talking .03" difference between all of these measurements, that's fairly small, but it will definitely create a loose feeling stock if you were to buy the commercial stock.
|
|
|
Post by X on Sept 18, 2012 15:01:31 GMT -5
The CTR stock should work well since it has the locking thingy.
|
|
|
Post by Tank on Sept 18, 2012 18:35:21 GMT -5
For the record, I measured my real steel VLTOR receiver extension and it came out to 1.146".
|
|