|
|
Post by dispater on Jul 3, 2012 16:41:04 GMT -5
I have a kalash ak47 airsoft rifle aeg gun 12930 and it has this jamming problem. Batteries fully charged and gun works fine for 2 or 3 games. Then it just stops firing, doesn't make a sound or anything and battery is still charged. When i took it in the guy said it was broken and nothing more. From what i saw he was looking at the gear box, opened the handle of the gun. I just want to know whats wrong with my gun... is this a constant problem with this gun... how can i fix, etc.
Thank you for your time.
|
|
|
|
Post by Ghast on Jul 3, 2012 20:36:51 GMT -5
Check your motor tabs.
|
|
|
|
Post by Ogre on Jul 3, 2012 22:19:12 GMT -5
I have a kalash ak47 works fine for 2 or 3 games. Then it just stops firing, doesn't make a sound or anything and battery is still charged. Cybergun right? Had a the same problem, tear it apart, carefully put it all back together, if your not good with that kind of stuff, have someone who is do it for you. Normally solves the problem. Mine did this at Bangor back in January. FYI If you just bought it, give it 6 months and your going to need a new hop-up. |
|
|
|
Post by dispater on Jul 3, 2012 23:09:47 GMT -5
I'm not going to lie it was refurbished... So i knew it was a gamble. But why does it do that? By any chance can you recommend me any guns that is similar?
|
|
|
|
Post by Da Vinci - Да Винчи on Jul 4, 2012 9:37:36 GMT -5
Did you do this? I know my KWA's motor tabs can fall off after a while and the gun doesn't do anything at all, I just need to plug them back on. |
|
|
|
Post by Tank on Jul 4, 2012 9:54:08 GMT -5
Did you do this? I know my KWA's motor tabs can fall off after a while and the gun doesn't do anything at all, I just need to plug them back on. Where on earth are you getting all this information? I have never had issue one with my KWA. I know others that have never experienced this motor tab issue you are referring to, that have had theirs longer than I. Edit: Sorry, I missed that you were only referring to your KWA. |
|
|
|
Post by Ghast on Jul 4, 2012 11:17:38 GMT -5
Actually, it DOES seem to be a common problem. My KWA's tabs would fall off after a while when I first got it. So did Actionman's and OneManArmy's, they just don't crimp them down hard enough, it's a really easy fix.
|
|
|
|
Post by Da Vinci - Да Винчи on Jul 4, 2012 11:32:50 GMT -5
I should probably go do that, I'd hate for it to crap out in the middle of a game.
Hopefully the OP's problem is as simple as that.
|
|
|
|
Post by a1 (Babez) on Jul 4, 2012 23:09:27 GMT -5
Cybergun right? Had a the same problem, tear it apart, carefully put it all back together, if your not good with that kind of stuff, have someone who is do it for you. Normally solves the problem. Mine did this at Bangor back in January. FYI If you just bought it, give it 6 months and your going to need a new hop-up. No, I don't think any of this is necessary. And the hop up is irrelevant, but not sure if you were just giving him a heads up or not.  Also, try not to steer this into a KWA hate/love contest. If your gun is NOT making any noise when it "stops firing," try these basic troubleshooting tips. Some small dissasembly may be required to fully investigate or diagnose these possible problems: 1) Check Fuse. 2) Check battery/ connectors. 3) Check motor tabs, like we suggested. 4) Check for kinks or creases in the wires, or any faulty or bad connections. If it IS making a noise when the trigger is pulled, such as a slight clicking or 'wrrr'-ing (or worse), grinding, the issue may be mechanical, rather than electrical. Don't go tearing apart the whole thing, only to find the problem was something that did not require all the ass pain taking the gun apart. |
|
Blitz
New Member
Posts: 137
|
Post by Blitz on Jul 5, 2012 12:49:33 GMT -5
It's already been said, but I would definitely check the motor tabs. They have fallen loose on my KWA before.
|
|
|
|
Post by dispater on Jul 5, 2012 23:39:25 GMT -5
Alright guys, thanks a lot for helping me. This is why i like this community... many people actually are very helpful. Other forums that i have seen, the community usually ridicules people for their confusion. I'm glad this is a very friendly and helpful community. Thanks again guys...
pce
|
|
|
|
Post by Da Vinci - Да Винчи on Jul 6, 2012 10:14:02 GMT -5
Did you fix it?
|
|
|
|
Post by dispater on Jul 6, 2012 12:42:53 GMT -5
Yea everything is working now... something was loose, im guessing it was the motor tab. I'm not a airsoft expert so i don't know the components. But i just tightened, reconnected, etc and everything seems to work now. I'll let you guys know if anything happens.
|
|
|
|
Post by Ghast on Jul 6, 2012 13:37:10 GMT -5
Grab a pair of needlenose pliers and pinch that motor tab connector SLIGHTLY for a tighter fit so it doesn't fall off again.
|
|
|
|
Post by Gimpalong on Jul 6, 2012 15:23:06 GMT -5
RE: KWA tabs
Mine fell off within the first few minutes of having the gun. Popped the motor plate/bottom of the pistol grip off, pinched the tabs on more tightly and, voila, back in business.
|
|
