Sandbur
New Member
Who Dares Wins
Posts: 419
|
Post by Sandbur on Jan 31, 2013 18:02:13 GMT -5
Looks great, dood. Is that some repo AOR1 you've got there? If so, what brand?
|
|
|
Post by Dallas on Jan 31, 2013 18:02:41 GMT -5
Kit list, Zdybel? Looks awesome. Seconded on this. Third this! AOR2 is going to look freakin' hawt.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Jan 31, 2013 18:07:43 GMT -5
Good start there. I noticed that your 6094 is a lot darker than the other pouches on there. That 6094 is a Ferro one right? What brand are the pouches?
I'd say the comms could use a bit of sorting out as well. You'll want an mbtir replica and comtac II's or III's. Also, a few other details like like the stretch color on the pants are off (the new allwins are pretty much spot on) could be fixed. You probably want to swap out that bdu belt for a riggers belt, and your lanyard is not actually attached properly. The helmet should be a ballistic or a mich 2001 as well. On the whole though it's a good start. Most people probably aren't as much of a stickler as I am but I am really nitpicky, hence why my kit isn't posted yet.
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 18:08:29 GMT -5
Kitlist: Uniform-Allwin AOR1 combat set 2nd line- Ferro Concepts 6094a in AOR1(U.S. tactical sewing triple m4 pouch, TQ pouch, Ferro GP pouch, MP7 insert, Ferro hydro, Antenna) Bucket-Emerson FAST basejump painted AOR1(U.S. flag, UBL patch, SureFire HL1) Gloves-Mechanix original glove in black 1st line-Raine duty belt, Homemade blowout pouch in AOR1 from Argentina, 215 gear retention lanyard, remove before flight tag) Boots-Merrell chamelions gen 2
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 18:13:01 GMT -5
Good start there. I noticed that your 6094 is a lot darker than the other pouches on there. That 6094 is a Ferro one right? What brand are the pouches? I'd say the comms could use a bit of sorting out as well. You'll want an mbtir replica and comtac II's or III's. Also, a few other details like like the stretch color on the pants are off (the new allwins are pretty much spot on) could be fixed. You probably want to swap out that bdu belt for a riggers belt, and your lanyard is not actually attached properly. The helmet should be a ballistic or a mich 2001 as well. On the whole though it's a good start. Most people probably aren't as much of a stickler as I am but I am really nitpicky, hence why my kit isn't posted yet. Correct the carrier is Ferro, I'm definitely getting new comms, I want to get the Nacre quietpro setup. Things I still need are GPNVG's, riggers belt, new AOR1, and a ballistic ( I want to trade my basejump for one). I always wanted to know how the lanyard should be put on.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Jan 31, 2013 18:23:13 GMT -5
There should be a carabiner or frog clamp (like yours) on both ends. So in your case with the one loop end you should attach a locking carabiner on there. The locking carabiner should then be attached to the triangle metal loop (or sewn in one on LBT and 215 belts) and securely attached. The other end with the quick attach Frog clamp should then be positioned wherever it is not in the way when not in use. Some people just hook it onto the triangle loop where the other end is, and others loop it around back and onto a belt loop or the back of the belt.
If you were to use it when set up like this, you just attach the Frog clamp inside the Helo and if you fall out you will not be hanging by the back of your pants and it will be easier to get in.
Also, FYI the nacre quietpro isn't used by SEALs or DEVGRU IFAK. I think you may be thinking of the Sylinx quietops or c4ops.
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 18:29:07 GMT -5
Thanks man.
|
|
|
Post by Knife on Jan 31, 2013 18:59:43 GMT -5
You don't need a second carabiner for the lanyard, you can just loop the lanyard around the attachment point on your riggers belt.
I would swap it for a non Frog hook one. I've been told a lot of guys dislike those as they can have issues disengaging when under tension.
Nacre isn't appropriate as ctres said, that's a USMC thing. If you want earbuds like that, you need something Silynx or an Invisio X50, but be prepared to pay out the ass.
What's that white bit running across the back of your helmet?
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 19:02:47 GMT -5
Its white velcro I threw on for my PSQ20 battery box. Took it off for the pictures because it is a piece of the army.
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Jan 31, 2013 19:03:39 GMT -5
True, I forgot about that method of attaching it. In fact I noticed that that is how the LBT lanyards actually have the shackle attached.
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 19:36:06 GMT -5
Also, FYI the nacre quietpro isn't used by SEALs or DEVGRU IFAK. I think you may be thinking of the Sylinx quietops or c4ops. I mainly just want the PTT box for looks, too bad they dont make a replica.
|
|
|
Post by Knife on Jan 31, 2013 19:42:19 GMT -5
There is a replica of the C4 Ops. GWS makes it.
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Jan 31, 2013 19:44:38 GMT -5
Im only seeing it on discussion forums, what websites sell it?
|
|
ctres
New Member
Posts: 955
|
Post by ctres on Jan 31, 2013 19:56:36 GMT -5
www.gunsworkshop.net/I think you just have to contact them. As far as I know they aren't sold on other sites. From the little I've heard though they are quite nice.
|
|
beta08
New Member
Tam Spipper Fan Club
Posts: 846
|
Post by beta08 on Feb 1, 2013 20:17:55 GMT -5
|
|