|
Post by Crapshoot on Dec 24, 2011 16:57:18 GMT -5
Well I've had most of this stuff for a while now, but I've been too lazy to upload them until now. So here it goes... KIT LIST: -KWA KM4 RIS -ARES H&K G36C -Crosman Airmag C11 -8x MAG brand 100rd mid caps (with the duct tape MagPuls) -KWA 360rd hi cap (no MagPul) -2x STAR/ARES 30rd low caps -ARES 470rd hi cap -ACM Vertical Grip -UTG Rail Covers -Mission Spec Irene Adaptive Sling -High Sierra 2 liter hydro carrier -TMC HPC with Cummerbind -Condor MOLLE Pistol Holster(Tan) -2x Condor Radio Pouches(Tan) -Condor Triple M4 Open Top(Tan) -Condor Small Utility Pouch(Tan) -Condor Flashbang Pouch(Tan) -Condor Dump Pouch(Designed for belts, but it works with MOLLE)(ACU) -Save Phace Blaze Full Facemask -TRU-SPEC Woodland MARPAT pants -Kill rag -Unknown brand gloves -ACM Shemagh(OD/Black) Suggestions welcome.
|
|
|
Post by a1 (Babez) on Dec 24, 2011 18:31:21 GMT -5
Do you have a hydration carrier for the High Sierra/ Camelbak?
Cool stuff!
|
|
|
Post by Crapshoot on Dec 24, 2011 20:20:42 GMT -5
No, but I'm planning on getting a MAP for the MFR impression I'm attempting.
|
|
|
Post by Myers on Dec 24, 2011 20:31:59 GMT -5
Lose the ACU MagPuls in my opinion.
|
|
Zdybel
New Member
Im Zdybel Dig up old Facebook Posts bcuz im 1337
Posts: 786
|
Post by Zdybel on Dec 24, 2011 20:42:46 GMT -5
Is your woodland marpat A little off color, or Is It just the camera.
|
|
|
Post by Crapshoot on Dec 24, 2011 21:00:23 GMT -5
Myers, I agree, but I wanted to finish off the roll of tape, and they go in the radio pouches anyway, so they're not exposed.
legitmarine, no, it's just the lighting.
|
|
|
Post by Mles on Dec 24, 2011 21:40:21 GMT -5
That mask is really gaudy, but it is your kit so whatever floats your boat. And, where is your G36 flashider?
|
|
|
Post by Crapshoot on Dec 24, 2011 21:48:13 GMT -5
That mask is really gaudy, but it is your kit so whatever floats your boat. And, where is your G36 flashider? Well, my G36 came with a replacement metal one, so I finally got around to removing the damn orange one (this was a few months ago), and then I found out that the black one was machined incorrectly by ARES. I just ended up leaving it off. EDIT: Once I get some goggles, the mask will only be used for CQB anyway.
|
|
|
Post by Crapshoot on Jan 29, 2012 15:45:41 GMT -5
Bump for new pics: Gear: -Pantac RRV (CB) -Tru Spec Woodland Marpat top -Mechanix Original gloves -Bolle X1000 goggles -Condor Handheld Radio Pouch (Tan) -Carabiner (If you can see it) -American Flag Patch Gun: -Grip Pod -MagPul RSA Comms: -Motorola Talkabouts x2
|
|
|
Post by outlaw25 on Feb 27, 2012 22:00:14 GMT -5
What is with the home-made magpuls, crapshoot?
|
|
|
Post by Krylic on Feb 28, 2012 0:58:32 GMT -5
Are the lens in your save phace mask smoke or something else? I'm getting one and plan on changing the clear lens to a darker one that makes it more menacing.
|
|
|
Post by Crapshoot on Feb 29, 2012 20:09:29 GMT -5
Outlaw, I honestly don't see why anyone would buy legit MagPuls/Ranger Plates. They cost a lot of money compared to the duct tape ones, and duct tape is easier to bend, so it's easier to slap the bottom of the mag when reloading.
Krylic, The lens in it is the thermal lens that mine came with. You might get a different color, however, as I have a friend who has the same thermal lens, except his is yellow.
|
|
|
Post by Zander on Mar 1, 2012 19:58:44 GMT -5
1) They are rigid and can be grabbed from any angle 2) (Most Important) Protect your mags when dropped on concrete 3) People don't make "You know your a redneck when..." jokes at you.
|
|
|
Post by Crapshoot on Mar 3, 2012 10:20:09 GMT -5
551 is from Rel.
|
|
|
Post by snafu on Mar 3, 2012 21:10:00 GMT -5
Those magpuls are terrible. I have od green duct tape ones that look much better. Take your time with them and dont cover half the mag with tape. I bet if Zander saw mine he wouldn't even notice them, if he saw yours he would call you a hilltard.
Nice loadout though.
|
|