|
Post by hoggie on Feb 25, 2011 23:54:52 GMT -5
Okay, i'm not going to lie, my ECHO 1 ASR bolt is pretty annoying. I found a L96 bolt on Airsoft Atlanta. www.airsoftatlanta.com/Guarder_Type_96_L96_Steel_Bolt_Handle_New_Type_p/47891.htmI was wondering if it would fit inside of my gun? Well, into the bolt old. Link to my gun. www.airsoftgi.com/product_info.php?products_id=6572I can post a picture of my bolt pulled out of my sniper rifle itself if any of you would like a closer look at that. I'm working on getting the external to how i want it currently, just got a new bipod + stock, pics will be up tomorrow. ANYWAYS, back on topic. Also, i'm looking for something to cover up the tip of my barrel, not a silencer. My tightbore comes just up to the end, and i was wondering if i should spray paint a PBC pipe thats a couple inchs long and slide that on to keep dirt and other bad stuff from harming my baby. Barrel Spacers - What kind do you suggest? I'd like to barrel spacer up to 3 1/2 inchs prior to the end of the barrel itself. What a monster of a question thread! Thank you in advance, feel free to only answer one of the dozen questions
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Feb 26, 2011 21:25:21 GMT -5
1. To cover up the tip of the barrel, buy a polar star threaded adapter, and stick a flash hider. It will cost around $60 total, but will look totally bad ass, and will help prevent dirt from easily getting into the barrel. Check out airsoft atlanta for the flash hider, and shortyusa for the polar star adapter.
2. Barrel spacers- Make your own using electrical tape. You can wrap the tape around the barrel until it fits nice and snug inside of the outer barrel. This is cheaper than buying barrel spacers from a store online, which has spacers running at around 10 bucks a spacer.
|
|
|
Post by Timm on Feb 27, 2011 23:01:37 GMT -5
I do not think that handle will fit on the ASR.
|
|
|
Post by Yankee on Feb 28, 2011 9:16:04 GMT -5
As for barrel spacers, I always made my own.
|
|
fuzzywolly
New Member
Vegetation is gold
Posts: 901
|
Post by fuzzywolly on Feb 28, 2011 15:30:12 GMT -5
Forgot to answer your question regarding the bolt handle. I have the guarder bolt handle that you have linked and it works on my UTG l96, however, judging from the pics of the ASR, it appears to use a different bolt handle style. More like an APS2 bolt handle, but I cannot confirm that for you.
But I am pretty positive that the bolt handle you have linked will not work with your rifle.
|
|
|
Post by Timm on Feb 28, 2011 20:09:09 GMT -5
Im almost 100 percent sure you cant replace the handle on the ASR, the handle is too thin.
|
|