|
Post by Da Vinci - Да Винчи on Feb 17, 2013 21:38:12 GMT -5
That has everything you would ever need for airsoft. Well, I would maybe take out the shelf at the bottom *LEFT and use the area underneath the vests and such as a desk/workbench, maybe take out the divider between the hanging racks and put a single post to free things up a bit. I don't even have a rack for my rifles, they're all lying around my room in random places, or on my bed...
|
|
|
Post by Tank on Feb 17, 2013 21:47:21 GMT -5
Yes glides, that's the word I was looking for! I couldn't for the life of me remember what they were called. They make heavy duty ones, like what tool chests have, but they also cost a fortune.
If you get some plastic that is similar to what they use for gaming computer mouse feet, they should be plenty slick. I can't remember if it's Teflon, I'll try to look it up. Razer mice have it.
|
|
|
Post by Ghast on Feb 17, 2013 22:16:04 GMT -5
If you get some plastic that is similar to what they use for gaming computer mouse feet, they should be plenty slick. I can't remember if it's Teflon, I'll try to look it up. Razer mice have it. It's Teflon, Teflon nonstick pads are ubiquitous.
|
|
|
Post by Knief on Feb 18, 2013 9:28:27 GMT -5
I thought about pads but I'm pretty sure that the friction from running against bare wood would pretty much peel them off. I think I'm going to need a solid sheet for the drawers to run on. It doesn't have to span the whole width of the drawers, but it definitely has to go the whole depth under the edges of the drawers that make contact.
Somebody on another forum suggested delrin sheeting, but that would be $77 for each shelf for a total of $385. Yikes. I'm open to any cost-effective ideas though.
|
|
|
Post by snafu on Feb 18, 2013 9:34:17 GMT -5
All you have to do is sand down the wood were it slides and then wax it. It's what I used to do when refinishing and rebuilding old wood framed windows. They will have what you need at stadium hardware. Lowes may not have it, fyi. This is more of a specialty item that is the norm in the pulley style windows you would see in fancy old custom homes.
|
|
|
Post by Knief on Feb 18, 2013 9:50:43 GMT -5
I've got and old box of house wax at my parents' place. I'll give that a shot the next time I make it over there.
|
|
|
Post by Knief on Feb 24, 2013 15:26:09 GMT -5
|
|
Hound
New Member
I always break my guns...
Posts: 654
|
Post by Hound on Feb 24, 2013 17:02:33 GMT -5
Oh coyote and MARPAT looks so beautiful. Really nice setup. The MARPAT with coyote and the EI LVAC is just an amazing combination.
|
|
|
Post by M.S.-ARC on Feb 25, 2013 20:32:52 GMT -5
|
|
|
Post by Pagan on Feb 25, 2013 20:35:35 GMT -5
What do you think ARC?
I am literally waiting for asgi to post the echo 1 version on their site to buy it, the jg would save me some cash.
|
|
Sandbur
New Member
Who Dares Wins
Posts: 419
|
Post by Sandbur on Feb 25, 2013 20:37:23 GMT -5
Can't say I'm a big fan of the PRS on there, but other than that it's pretty tactical titties.
|
|
|
Post by Da Vinci - Да Винчи on Feb 25, 2013 20:38:59 GMT -5
If you put on a barrel extension, it might look better with the PRS.
|
|
|
Post by M.S.-ARC on Feb 25, 2013 20:41:08 GMT -5
What do you think ARC? I am literally waiting for asgi to post the echo 1 version on their site to buy it, the jg would save me some cash. So far so good. Chronoing at just over 350 with .2's. We'll have to see after Saturday though if it performs well. Hopefully it won't crap out like Blags. Got here from airplat in less than a week. No issues with the package at all. Can't say I'm a big fan of the PRS on there, but other than that it's pretty tactical titties. Yeah I'm not quite sure II'm 100% sold on the stock either although its kind of growing on me. I like it better than the standard stock that came with it though. I'd prefer to put a CTR stock on it. I did have one of those up until recently and I knew I was going to regret selling it.
|
|
|
Post by Tank on Feb 25, 2013 20:43:16 GMT -5
ARC, did it come with that FSC556 (quick suppressor mount capable version), or did you buy that separate?
|
|
|
Post by M.S.-ARC on Feb 25, 2013 20:46:18 GMT -5
ARC, did it come with that FSC556 (quick suppressor mount capable version), or did you buy that separate? Got it separate. It comes with an ugly ass orange plastic ak flash hider.
|
|